01banch Posted December 30, 2009 Report Share Posted December 30, 2009 I have a graydon proline 2 into one intake with a k+n filter (the filter could use replacing) for sale runs great need to sell because I am building a cub. Will trade for 30mm or 34mm pj's or sell for $175.00 shipped. Quote Link to comment Share on other sites More sharing options...
WINDYCITYJOHN400 Posted December 31, 2009 Report Share Posted December 31, 2009 I'm looking for one....but that one looks odd. What's bolted/clamped to it in front of the carb? Got any pics with it off the bike and cleaned up? Quote Link to comment Share on other sites More sharing options...
01banch Posted December 31, 2009 Author Report Share Posted December 31, 2009 Either the air cleaner or the intake that bolts to the 2 into one. I have not taken it off the bike yet but if you are interested i can pull it off tommorow and get you some cleaned up pictures. Quote Link to comment Share on other sites More sharing options...
WINDYCITYJOHN400 Posted January 1, 2010 Report Share Posted January 1, 2010 Looks like it was modded. The standard Graydon doesn't need an intake bolted to it. It just has a rubber hose with a clamp to the 2 into 1 and a clamp on the carb. I can't see what you have going on there with the pipes in the way. But judging from the extra long bolts and nuts, I'd say it looks a little rigged. Id like to see some better pics if you could.... Quote Link to comment Share on other sites More sharing options...
banshee631 Posted January 1, 2010 Report Share Posted January 1, 2010 (edited) trade for a +4 pcd swinger set up for stock carrier. it only has about 6 hours ride time on it since new. i went to flattrack racing and now run a -2 swinger Edited January 1, 2010 by banshee631 Quote Link to comment Share on other sites More sharing options...
01banch Posted January 1, 2010 Author Report Share Posted January 1, 2010 I dont know about it being a little rigged. I bought it off here and have ran it for a couple months and it has worked alright, I just want to go to something that is going to work on a cub. I can get you some better pictures if you are genuinely interested. But more specifically what do you want? Quote Link to comment Share on other sites More sharing options...
WINDYCITYJOHN400 Posted January 2, 2010 Report Share Posted January 2, 2010 I dont know about it being a little rigged. I bought it off here and have ran it for a couple months and it has worked alright, I just want to go to something that is going to work on a cub. I can get you some better pictures if you are genuinely interested. But more specifically what do you want? Asked for close-up pics of it already. Cleaned up and off the bike (So your pipes aren't covering the stuff that I have a question with) Quote Link to comment Share on other sites More sharing options...
01banch Posted January 4, 2010 Author Report Share Posted January 4, 2010 Bump 150 obo shipped! Quote Link to comment Share on other sites More sharing options...
01banch Posted January 5, 2010 Author Report Share Posted January 5, 2010 bump Quote Link to comment Share on other sites More sharing options...
WINDYCITYJOHN400 Posted January 6, 2010 Report Share Posted January 6, 2010 Quote Link to comment Share on other sites More sharing options...
01banch Posted January 6, 2010 Author Report Share Posted January 6, 2010 what is that supposed to mean? Quote Link to comment Share on other sites More sharing options...
WINDYCITYJOHN400 Posted January 7, 2010 Report Share Posted January 7, 2010 I means Bye. Quote Link to comment Share on other sites More sharing options...
camatv Posted January 7, 2010 Report Share Posted January 7, 2010 whoops i never actually looked at this one. maybe graydon changed the design? for whatever reason? i ran one of these with a 39mm pwk for about 2-3 years in MX it worked great. but it just had the hose for mounting the carb.. Quote Link to comment Share on other sites More sharing options...
01banch Posted January 8, 2010 Author Report Share Posted January 8, 2010 (edited) this is what i know. I bought it off a member here, he said it was a graydon proline, I traded for it and now i want to go back to duels for a bigger motor. I had to do a bunch of jetting and needle changes to get it correct and have done so, I will throw in the "stock" needle that came with it as well as the one i bought, ill throw in a brand new throttle cable and thumb throttle as well as a k+n that is on it with a outerwear. for 150 shipped. Edited January 8, 2010 by 01banch Quote Link to comment Share on other sites More sharing options...
01banch Posted January 9, 2010 Author Report Share Posted January 9, 2010 I pulled it apart today and have some detailed pictures. Please let me know if you have any questions. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.