sy1219 Posted November 13, 2009 Report Share Posted November 13, 2009 As it says above. I did mine & came out 110 psi. per cyl. Quote Link to comment Share on other sites More sharing options...
blowit Posted November 13, 2009 Report Share Posted November 13, 2009 As it says above. I did mine & came out 110 psi. per cyl. What gauge did you use? Quote Link to comment Share on other sites More sharing options...
bad 350 shee Posted November 13, 2009 Report Share Posted November 13, 2009 thats ok where u at sea level Quote Link to comment Share on other sites More sharing options...
Slickgib Posted November 14, 2009 Report Share Posted November 14, 2009 thats ok where u at sea level I live in san diego. pretty much sea level i always get 140-160...my blater gets 125... might be time to rebuld.. fyi. Quote Link to comment Share on other sites More sharing options...
sy1219 Posted November 14, 2009 Author Report Share Posted November 14, 2009 Live in MI. Not sure about sea level and all that stuff. just gets 110 psi. that is why I asked what is stock psi.. Quote Link to comment Share on other sites More sharing options...
Rodneya Posted November 14, 2009 Report Share Posted November 14, 2009 125 at sea level for a stock motor. readings much higher than that are probably from an inaccurate guage Below 90 to 100 is time for a rebuild, or if there is a big difference between sides. If both sides are 110 you are good for a while yet. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.