rileyrs Posted November 6, 2009 Report Share Posted November 6, 2009 just bought an 87 banshee. tons of aftermarket, motor just rebuilt by trinity. with less than 20 hours on it. anyway, ive only had it for a few days, and today while riding, it stalled out on me after letting off the throttle, originally i thought i was out of gas, but there was plenty. i got it started again, and then a minute later it did the same thing, and then was really hard to start. i got it home and now its sitting and i dont know where to start, ive neer worked on a 2 stroke like this b4, but i can learn. ive been riding quads for years, but only 4 strokes so far, but i wanted a dunes machine. any help on this problem would be great, thanks. Quote Link to comment Share on other sites More sharing options...
blowit Posted November 6, 2009 Report Share Posted November 6, 2009 just bought an 87 banshee. tons of aftermarket, motor just rebuilt by trinity. with less than 20 hours on it. anyway, ive only had it for a few days, and today while riding, it stalled out on me after letting off the throttle, originally i thought i was out of gas, but there was plenty. i got it started again, and then a minute later it did the same thing, and then was really hard to start. i got it home and now its sitting and i dont know where to start, ive neer worked on a 2 stroke like this b4, but i can learn. ive been riding quads for years, but only 4 strokes so far, but i wanted a dunes machine. any help on this problem would be great, thanks. TORS system. Read up on it here. Make sure your throttle cable is adjusted to allow 1/4" of play in the thumb throttle. If there is either no slack or excessive slack, stalling will occur at a 0% throttle condition. Mull Engineering Quote Link to comment Share on other sites More sharing options...
rileyrs Posted November 6, 2009 Author Report Share Posted November 6, 2009 the banshee has a twist throttle uprage so doesn't that mean tors is gone? the two white connectors under gas tank are tors right? cuz those are unplugged/ could the tors system still active, or is this something else? Quote Link to comment Share on other sites More sharing options...
blowit Posted November 6, 2009 Report Share Posted November 6, 2009 the banshee has a twist throttle uprage so doesn't that mean tors is gone? the two white connectors under gas tank are tors right? cuz those are unplugged/ could the tors system still active, or is this something else? The TORS black box is located just above the LH pipe. Make sure that is unplugged. If so, maybe it is possible that you do not have any idle air set into the carbs. If you eleminate the TORS system, you are supposed to add the idle air screws on the side to adjust idle. If you do not have those, the bike will not idle. We set some bikes up with no idle for racing so it offers more engine braking. Just FYI. Mull Engineering Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.