papa_smurf49319 Posted October 20, 2009 Report Share Posted October 20, 2009 ok so heres the dilema, i need a stator and flywheel, dont wanna spend the money for oem ,and have heard so much bad about ricky stator. Id like to buy new if at all possible but dont know where to go. Ive been looking at rm stator stuff and dont know if anybody has much experience with it. Im also considering buying them used, but would like to have new. Just wondering where everybody is going for this stuff. Thanks cody Oh heres a link to the rm page im looking at http://cgi.ebay.com/ebaymotors/Yamaha-YFZ350-Banshee-Stator-Flywheel-Puller-rectifier_W0QQcmdZViewItemQQhashZitem1c0d4a4fecQQitemZ120482058220QQptZMotorsQ5fATVQ5fPartsQ5fAccessories Quote Link to comment Share on other sites More sharing options...
papa_smurf49319 Posted October 20, 2009 Author Report Share Posted October 20, 2009 ok i just called rm and they said they do sell some rickystator stuff but the flywheel and stators for banshees are theres and not produced by ricky stator. Whatever that means lol. Anybody have any experience? Thanks Cody Quote Link to comment Share on other sites More sharing options...
Snopczynski Posted October 20, 2009 Report Share Posted October 20, 2009 Im pretty sure that rm stators parts come out of the same factory in china that Ricky Stator uses. Call Rick's Motorsport Electrics. Quote Link to comment Share on other sites More sharing options...
papa_smurf49319 Posted October 20, 2009 Author Report Share Posted October 20, 2009 (edited) i checked there site and didnt see that they produce flywheels. Basically i dont want this to happen again Edited October 20, 2009 by papa_smurf49319 Quote Link to comment Share on other sites More sharing options...
jbooker82 Posted October 20, 2009 Report Share Posted October 20, 2009 I would get an OEM Flywheel. Rick Stator's have been known to come appart. I wouldnt run an RM one ethire. If you want a bran new stator then you can get Ricks Motor Sports for a 2 output high wattage or and OEM new stator for the same price 250.00. Here is my Ricky stator flywheel. Quote Link to comment Share on other sites More sharing options...
VegasJeff Posted October 20, 2009 Report Share Posted October 20, 2009 i checked there site and didnt see that they produce flywheels. cody,You could try that minkia guy on here,he's a banshee swap meet type guy. just a suggestion. Quote Link to comment Share on other sites More sharing options...
Koolguyson Posted October 20, 2009 Report Share Posted October 20, 2009 Bought a Ricks Motorsports 200w stator. Didn't work out of the box. Called them up, and they wouldn't do anything from me since I didn't buy it from an authorized dealer. Bought a second one and it did the same damn thing. I will only buy OEM now. Quote Link to comment Share on other sites More sharing options...
bansheesandrider Posted October 21, 2009 Report Share Posted October 21, 2009 I bought a Rick's Electrics CDI box last year while I was at St. Anthony's and had problems with it from the get go-bike would miss and sputter, thought it was my jetting due to the altitude. Got back to Oregon and jetted for here, the next ride the thing had to be towed to start when cold, but would kick start when hot. Eventually i had to tow it every time. Got home checked everything out and tried another OEM box I had and the bike started right up and ran fine. I called Rick's and they said I had to go through where I bought it. So I had to call Rexburg Motorsports in ID and have them call Rick's. Eventually I sent it to Rick's and they did replace it- when I got it I plugged it in, made sure it worked, and then put it away for a spare. So, if you buy from Rick's Electrics make sure it is either directly from them, or an authorized dealer. Good luck. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.