theshee Posted October 13, 2009 Report Share Posted October 13, 2009 (edited) I am going to be building a stock stroke, stock cylinder hillshooter banshee and am just trying to see who everybody has been using for their stock stroke, stock cylinder porting? I have NEVER ran a stock stroke bike, so this is all a little different to me. I plan on running this bike with 17cc domes, CPI inframes, and on 33mm carbs. This bike will mainly be used for the hillshooting we do at walden, and the occasional race, but needs to be setup more for hillshoots then anything. Any input would be great. and im retarted, i meant to say CYLINDER porting in the title, i was just reading on raptor forum and has still thinking 4 stroke when i wrote this. Edited October 13, 2009 by theshee Quote Link to comment Share on other sites More sharing options...
Snopczynski Posted October 13, 2009 Report Share Posted October 13, 2009 If I wanted to build a competitive drag 350, I would send those cylinders to K&T, Packard, or RDZ. Quote Link to comment Share on other sites More sharing options...
Sammy Posted October 13, 2009 Report Share Posted October 13, 2009 I was gonna mention RDZ also, but then again he's not known for his "Hill Shooter" port jobs either. My vote goes to F.A.S.T, HJR or Wildcard. When my personal cylinder get done. Jeff will be behind the Scalpel. Quote Link to comment Share on other sites More sharing options...
theshee Posted October 13, 2009 Author Report Share Posted October 13, 2009 If I wanted to build a competitive drag 350, I would send those cylinders to K&T, Packard, or RDZ. Im leaning torward K&T at the moment. I have kims cylinders on my current 4mil and it runs damn good, just wanted to see some other opinions on other port jobs. Quote Link to comment Share on other sites More sharing options...
'04limited Posted October 13, 2009 Report Share Posted October 13, 2009 my personal vote is gonna go to HJR i have his dune/hillshoot port on my stock stroke and it flat out moves Quote Link to comment Share on other sites More sharing options...
papa_smurf49319 Posted October 13, 2009 Report Share Posted October 13, 2009 passion 12 port Quote Link to comment Share on other sites More sharing options...
locogato11283 Posted October 13, 2009 Report Share Posted October 13, 2009 ive seen a lot of very good running stock cylinder motors come out of FAST. thats not to say there arent others, but i think Jeffs specialty is stock cylinder stuff. Quote Link to comment Share on other sites More sharing options...
racer Posted October 13, 2009 Report Share Posted October 13, 2009 Dan Hull at A&S? Quote Link to comment Share on other sites More sharing options...
locogato11283 Posted October 13, 2009 Report Share Posted October 13, 2009 Dan Hull at A&S? is he the guy that gets so busy that he sends shit out to other people to port? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.