92 Z71 Posted October 13, 2009 Report Share Posted October 13, 2009 Once the frame and engine are spoken for I'll start tearing it down and shipping parts out. All prices are shipped. Frame-$300 Engine-$900 A-Arms-$350 Works triple rate front shocks-$400 Janssen -1 swinger-$200 Roll/IMS pegs-$150 VForce 3's-$90 Trailtech's-$90 FMF's-$100 Billet bumper-$150 Chain guides-$50 Sprockets-$30 K&N pods-$40 Braided brake lines FR-$60 That'll get it started, I want everything gone so if there's something you don't see ask. Post in this thread if you want something so I can keep track of who gets first dibs on what. A lot of these parts are new with not one ride on them. Frame has fresh powdercoat, and the engine has just been professionally torn down and rebuilt because I had the cases replaced no chain whack or leaks anywhere. I am located in Vegas. I will also need a little bit of time getting parts shipped out because the whole thing is assembled right now. Quote Link to comment Share on other sites More sharing options...
HOODWORKZ Posted October 13, 2009 Report Share Posted October 13, 2009 Got a better pic of bars and clamps? Dibs Quote Link to comment Share on other sites More sharing options...
HOODWORKZ Posted October 13, 2009 Report Share Posted October 13, 2009 Are those fmf fattys..how do they compare to T5's Quote Link to comment Share on other sites More sharing options...
bad 350 shee Posted October 13, 2009 Report Share Posted October 13, 2009 what kind of sylincers do the pipes have Quote Link to comment Share on other sites More sharing options...
92 Z71 Posted October 13, 2009 Author Report Share Posted October 13, 2009 Got a better pic of bars and clamps? Dibs The bars are brand new. I'll try to get a pic later. Quote Link to comment Share on other sites More sharing options...
92 Z71 Posted October 13, 2009 Author Report Share Posted October 13, 2009 The a-arms are Wicked +2+1, the pipes are FMF fatty's with powercore 2 silencers (the probably need repacked) oh and the left silencer is tweaked a little it doesn't sit straight up and down when mounted. Here is a picture of the back of the quad, has a different set of pipes in this pic but everything else is the same. Quote Link to comment Share on other sites More sharing options...
bbcmudtruck Posted October 13, 2009 Report Share Posted October 13, 2009 I'll take that carrier and swing arm. I pmd you back. Quote Link to comment Share on other sites More sharing options...
RippinShee Posted October 13, 2009 Report Share Posted October 13, 2009 Dibbs on the trailtechs! Pm me, ill send payment asap! Quote Link to comment Share on other sites More sharing options...
papa_smurf49319 Posted October 13, 2009 Report Share Posted October 13, 2009 how much time is on the reeds? What kind of shape are they in? Got any pics? Quote Link to comment Share on other sites More sharing options...
notsed Posted October 13, 2009 Report Share Posted October 13, 2009 whats in the engine for mods if any, and how is the condition? Quote Link to comment Share on other sites More sharing options...
92 Z71 Posted October 13, 2009 Author Report Share Posted October 13, 2009 The reeds are in great shape, I don't have a picture of them or know how much time is on them, I bought them a while back from a member on here, they looked great when I got them and I haven't even rode the bike with them installed. The engine is in really good shape, I had the cases replaced because my originals were cracked, these cases are perfect. I had an engine builder here locally put it all together for me, it's all stock except for a billet water impeller. Last I checked the compression was right at about 120psi. Quote Link to comment Share on other sites More sharing options...
bbcmudtruck Posted October 13, 2009 Report Share Posted October 13, 2009 What is your paypal? I want that swingarm and carrier! Quote Link to comment Share on other sites More sharing options...
bbcmudtruck Posted October 14, 2009 Report Share Posted October 14, 2009 Money sent for swingarm and carrier! Quote Link to comment Share on other sites More sharing options...
petenorth Posted October 14, 2009 Report Share Posted October 14, 2009 How much for the tires shipped to KY? Quote Link to comment Share on other sites More sharing options...
OilFieldMan Posted October 15, 2009 Report Share Posted October 15, 2009 How much for the billet impeller? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.