mercury65 Posted October 8, 2009 Report Share Posted October 8, 2009 i have ben porting like 10 years now however i will not claim to be a pro and i m shure there is some out there that claim they are and cant do as good a job as i can. numbers wont help you much. knowing other things will such as a 4 mill will have less rpm with the same port. longer stroke = les rpm no matter what your building. racing on the flat only is way diff. then racing up hills. i built a shee that would rev so high even i couldent belive it. on the flat is was real fast,i m doing a set right now because after he put a 4 mill in his bike the powerband became real short not just low. a bike with stock stroke that is ported right will beat a 4 mill without porting, and on flat only, stock jug 4 mill has no chance with a flat drag port with stock stroke. up a steep hill in the sand, fair match. want o know more IM me, some things i dont care to share in open forum dont mind a few people know some of my tricks but not everyone. Quote Link to comment Share on other sites More sharing options...
dusty_v141 Posted October 8, 2009 Author Report Share Posted October 8, 2009 pm sent Quote Link to comment Share on other sites More sharing options...
werner Posted October 8, 2009 Report Share Posted October 8, 2009 if you port as good as you spell...your in trouble. take it somewhere or go now and post a thread in the wanted section for cylinders when you jack those up. Quote Link to comment Share on other sites More sharing options...
dusty_v141 Posted October 8, 2009 Author Report Share Posted October 8, 2009 lol ya im not the best speller. and i will be buying another set after i get my tools Quote Link to comment Share on other sites More sharing options...
jbooker82 Posted October 8, 2009 Report Share Posted October 8, 2009 We know a PORTED stock stroke is faster than a NON Ported 4 mill. You didn't say anything about a ported stock stroke vs ported 4 mill. I bet 10mills are really slow since they add even more stroke than 4mills. Quote Link to comment Share on other sites More sharing options...
mercury65 Posted October 9, 2009 Report Share Posted October 9, 2009 We know a PORTED stock stroke is faster than a NON Ported 4 mill. You didn't say anything about a ported stock stroke vs ported 4 mill. I bet 10mills are really slow since they add even more stroke than 4mills. We. dude speak for your self lots of people dont know that. and i m shure many more would say that you dont speek for them. Quote Link to comment Share on other sites More sharing options...
mercury65 Posted October 9, 2009 Report Share Posted October 9, 2009 if you port as good as you spell...your in trouble. take it somewhere or go now and post a thread in the wanted section for cylinders when you jack those up. because of pepole that just talk crap. is why i dont give out some things i know to everyone. some dont deserve to know. i will say this i will tell him what i know and he can call some builders and find out if what i say is right or wrong. but i m helping him r you. Quote Link to comment Share on other sites More sharing options...
dusty_v141 Posted October 9, 2009 Author Report Share Posted October 9, 2009 thank you mercury65. i thoughtthis sight was too help other people and share our love of banshee's. thanks too everybody that does help people. Quote Link to comment Share on other sites More sharing options...
dajogejr Posted October 9, 2009 Report Share Posted October 9, 2009 As said on ATVDragracers, pickup a couple books by A Bell and Gordon Jennings on two stroke performance. They'll blow your mind.... Porting is half in the numbers, the other half is what puts food on the table for the builders. And I wouldn't divulge those numbers either..... Quote Link to comment Share on other sites More sharing options...
dusty_v141 Posted October 9, 2009 Author Report Share Posted October 9, 2009 i am going too get the books pretty soon. Quote Link to comment Share on other sites More sharing options...
Larry's Shee Posted October 9, 2009 Report Share Posted October 9, 2009 For a very, very long time , long before banshees came along, they were called "speed secerets" for a reason. Personally got more out of Jennings book than Bell, but both are very informative. If you want numbers Jennings will explain how to come up with your own. Personally have not ported a shee (yet) so cant offer suggestions on numbers. Quote Link to comment Share on other sites More sharing options...
mercury65 Posted October 10, 2009 Report Share Posted October 10, 2009 funny you brought Gordon Jennings up because that is one of the things i m sending him. Quote Link to comment Share on other sites More sharing options...
mopar1rules Posted October 10, 2009 Report Share Posted October 10, 2009 here dusty_v141, read this till your hearts content..... http://edj.net/2stroke/jennings/ Quote Link to comment Share on other sites More sharing options...
dusty_v141 Posted October 10, 2009 Author Report Share Posted October 10, 2009 thanks mopar1rules i think you gave me that link before but my stupid computer will not open pdf files for some reason i will try too get it working later.thanks for allthe help from everyone Quote Link to comment Share on other sites More sharing options...
dusty_v141 Posted October 16, 2009 Author Report Share Posted October 16, 2009 ok guys i have changed my mind about a drag bike. im still going too port it but im going too do a play/dune port.im getting tired of not being able too ride it when i want too. i am going too buy another motor and build a drag bike from the ground up. but for now im just going too set this one up for trail racing and stuff like that can yaw give me some input on how too port it and make the power come on smooth in the mid and pull forever lol. thanks again. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.