DirtyFitz Posted September 22, 2009 Report Share Posted September 22, 2009 Hey guys how's it going? I'm looking for some trouble shooting help here on the Forums. I have an 01 Banshee that I've had since I bought it from the Dealership years ago so I am the original owner. About a year and 3 months ago my top end went so I decided to replace it. I replaced it and got it installed, bike started right up and ran great until 3/4 throttle and had a slight bog so I decided to get into my Haynes manual and on the HQ here to figure it out. Well as I was working on my carbs with the STUPID TORS system one of the knobs on the top snapped as I was working with it so I gave up on the bike for a few months and decided I was going to buy a TORS Removal kit. Well unfortunately I got locked up for a little while and missed my whole dune season last year :[. Just last week I ordered a TORS Removal Kit and it got here yesterday. I've been working since earlier this morning on the thing and I cant get it to start. I've got the idles tapped, drilled, and installed, throttle line installed, carb caps installed, and all the old TORS stuff cut and snipped off. I replaced the Oil, Plugs, and did a little cleaning in the engine. I have my key ON, Switch ON, and it still won't start. I kicked about 45 times and it sounds like there's an electrical problem not letting it start, I was thinking something I cut on the TORS lines did it. I pulled it behind my truck thinking a 5 mph pull start might help but still nothing....I'm going to check the spark right now and go from there but any help would be appreciated. Like I said I believe its electrical and im considering taking off ALL TORS connections and Key connections. If you guys need pictures for a more clear understanding let me know. Quote Link to comment Share on other sites More sharing options...
DirtyFitz Posted September 22, 2009 Author Report Share Posted September 22, 2009 I just checked and there's NO spark :-/ I'm kinda lost .... Quote Link to comment Share on other sites More sharing options...
banshee-mike Posted September 22, 2009 Report Share Posted September 22, 2009 i did a tors remove the other day and did not unplug anything but i was wanting to get rid of the wire that goes to the throttle lever so i unplugged it and the bike wouldnt start.starts fine with it plugged up.i just pulled it out of the throttle assembly and tie wraaped it under the plastic.hope this might help. Quote Link to comment Share on other sites More sharing options...
DirtyFitz Posted September 23, 2009 Author Report Share Posted September 23, 2009 I got it all figured out now, I just unplugged it from the main TORS box which i'll be wrenching off tomorrow and smashing. Got spark, got the bike to start. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.