bp12 Posted September 5, 2009 Report Share Posted September 5, 2009 need to know what the top screws do and how to set them Quote Link to comment Share on other sites More sharing options...
TNTS355 Posted September 6, 2009 Report Share Posted September 6, 2009 need to know what the top screws do and how to set them This should help you out......http://www.youtube.com/watch?v=hpqeSpbq0PQ Quote Link to comment Share on other sites More sharing options...
swrbansheeboy Posted September 11, 2009 Report Share Posted September 11, 2009 if you still have the tors installed then you will adjust the throttle with the large aluminum screws on the back of the tors units. if you have removed the tors then you should have some brass idle adjustment screws on the sides of the carbs that will raise and lower the carb slides that will adjust your idle speed. if you dont have the tors and dont have the idle screws installed then you will either have to install the screws (recomended) or just hillbilly it up by adjusting out the brass set screws on the carb tops. by doing this you wont have any freeplay in the throttle and it's not recomended but it works... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.