sheerider1026 Posted July 12, 2009 Report Share Posted July 12, 2009 here is the start of my part out.. first is a polished 392 cub cylinder.. it is like new with very little time, 68mm bore stock stroke, includes pistons head and dones.. all ready to bolt on and go.. it has 20cc domes setup for pump gas.. 900 plus the ride. will consider a partial trade on a set of stock cylinders on these. Quote Link to comment Share on other sites More sharing options...
sheerider1026 Posted July 12, 2009 Author Report Share Posted July 12, 2009 NEXT are the intake, reeds and carbs.. the intake is a boss racing for 33-35mm carbs.. has a built in crossover also, 60.00.. asking 80.00 on the vforce reeds, and the carbs are 33mm pwk's. they have about 4 rides on them since bought new, they already have the easy springs installed, a stainless braided throttle cable, longer adjusters on the carbs caps, and brass idle screws still new in the package.. i also have some rubber boot adapters i will thow in if you are using a stock airbox, 300.00 Quote Link to comment Share on other sites More sharing options...
banshee(911) Posted July 12, 2009 Report Share Posted July 12, 2009 here is the start of my part out.. first is a polished 392 cub cylinder.. it is like new with very little time, 68mm bore stock stroke, includes pistons head and dones.. all ready to bolt on and go.. it has 20cc domes setup for pump gas.. 900 plus the ride. will consider a partial trade on a set of stock cylinders on these. are they ported and if so by who? Quote Link to comment Share on other sites More sharing options...
sheerider1026 Posted July 12, 2009 Author Report Share Posted July 12, 2009 these are not ported, they are "out of the box" cub cylinders already have porting that is considered drag port.. Quote Link to comment Share on other sites More sharing options...
bansheesa Posted July 12, 2009 Report Share Posted July 12, 2009 Sorry for the question. What jets are you running in you carbs? What temps and altitude? Reason for asking is that I have the same setup as you and I am battling to jet. Your help will be appreciated. Quote Link to comment Share on other sites More sharing options...
sheerider1026 Posted July 12, 2009 Author Report Share Posted July 12, 2009 carbs and intake are SOLD!! reeds and topend still for sale. Quote Link to comment Share on other sites More sharing options...
shanYE west Posted July 12, 2009 Report Share Posted July 12, 2009 did the throttle cable go with the carbs? Also PM me your paypal address and I'll send that payment through for the other parts. Quote Link to comment Share on other sites More sharing options...
sheerider1026 Posted July 12, 2009 Author Report Share Posted July 12, 2009 yea, the cable went with the carbs.. Quote Link to comment Share on other sites More sharing options...
sheerider1026 Posted July 12, 2009 Author Report Share Posted July 12, 2009 reeds SOLD!!! topend still for sale, also have a durablue axle, and a set of powdercoated, mint cases for sale. Quote Link to comment Share on other sites More sharing options...
sheerider1026 Posted July 13, 2009 Author Report Share Posted July 13, 2009 ttt Quote Link to comment Share on other sites More sharing options...
sheerider1026 Posted July 16, 2009 Author Report Share Posted July 16, 2009 ttt Quote Link to comment Share on other sites More sharing options...
Bigclo Posted July 16, 2009 Report Share Posted July 16, 2009 NEXT are the intake, reeds and carbs.. the intake is a boss racing for 33-35mm carbs.. has a built in crossover also, 60.00.. asking 80.00 on the vforce reeds, and the carbs are 33mm pwk's. they have about 4 rides on them since bought new, they already have the easy springs installed, a stainless braided throttle cable, longer adjusters on the carbs caps, and brass idle screws still new in the package.. i also have some rubber boot adapters i will thow in if you are using a stock airbox, 300.00 Id give you $50 shipped to 11787 for the intake if still avalible. Quote Link to comment Share on other sites More sharing options...
sheerider1026 Posted August 5, 2009 Author Report Share Posted August 5, 2009 bump Quote Link to comment Share on other sites More sharing options...
olyeller Posted August 6, 2009 Report Share Posted August 6, 2009 I have some stock ported jugs 64.5mm needs bored. how much cash you need? cubs come with pistons and hardware? 67217 zip also have stock head with it Quote Link to comment Share on other sites More sharing options...
9498banshee Posted August 16, 2009 Report Share Posted August 16, 2009 in need of the cases how much shipped to 45362? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.