banshee(911) Posted July 9, 2009 Report Share Posted July 9, 2009 well i was at the end of my adjustment on my clutch perch so i thought i needed a new cable.(thought mine was stretched)well i ordered one yesterday and it came in today well i took my old one off and tried to replace it with the new one and wouldnt you know it .its longer than my stocker .that was 25.00 well spent Quote Link to comment Share on other sites More sharing options...
wesw Posted July 9, 2009 Report Share Posted July 9, 2009 had same problem called rmatv about it they denied it was a problem called motion pro they know nothing is a piece of shit will say that. wish i know a bike that could use it. Quote Link to comment Share on other sites More sharing options...
FireHead Posted July 9, 2009 Report Share Posted July 9, 2009 I don't have a problem with any of my Terminator cables...... I got them from RMATV as well. Quote Link to comment Share on other sites More sharing options...
shanYE west Posted July 9, 2009 Report Share Posted July 9, 2009 I just buy OEM.. its about 10.00 cheaper. Quote Link to comment Share on other sites More sharing options...
KlotzBanshee Posted July 9, 2009 Report Share Posted July 9, 2009 Don't have any problems with mine...I got them directly from Motion Pro. :shrug: Clutch pulls much smoother than when I had the stocker. Quote Link to comment Share on other sites More sharing options...
banshee(911) Posted July 9, 2009 Author Report Share Posted July 9, 2009 I don't have a problem with any of my Terminator cables...... I got them from RMATV as well. what clutch handle you running? Quote Link to comment Share on other sites More sharing options...
FireHead Posted July 10, 2009 Report Share Posted July 10, 2009 what clutch handle you running? I have used an MSR Raptor lever setup and a Fly (the expensive-ass one with all the bearings in it) without any problems. I don't think I have used an OEM perch/lever setup with a Terminator cable. :geek: Quote Link to comment Share on other sites More sharing options...
banshee(911) Posted July 10, 2009 Author Report Share Posted July 10, 2009 I have used an MSR Raptor lever setup and a Fly (the expensive-ass one with all the bearings in it) without any problems. I don't think I have used an OEM perch/lever setup with a Terminator cable. :geek: thanx ,thats prolly the difference well i was hoping you ran the asv levers thats what im gonna get and save the cable to c if it works :thumbsup: Quote Link to comment Share on other sites More sharing options...
wesw Posted July 10, 2009 Report Share Posted July 10, 2009 ran mine with a msr raptor lever didnt help layed mine down to my stocker and its just longer dont know why they claimed the model number was correct but tape measure doesnt lie. Quote Link to comment Share on other sites More sharing options...
POORBOY350 Posted July 10, 2009 Report Share Posted July 10, 2009 mine worked perfect Quote Link to comment Share on other sites More sharing options...
banshee(911) Posted July 10, 2009 Author Report Share Posted July 10, 2009 ran mine with a msr raptor lever didnt help layed mine down to my stocker and its just longer dont know why they claimed the model number was correct but tape measure doesnt lie. thats what i did and mine is longer as well :shrug: Quote Link to comment Share on other sites More sharing options...
RadarRacing Posted July 13, 2009 Report Share Posted July 13, 2009 You can get a good harley shop to shorten that cable up and solder a new end on it. I get em done for about $10 Quote Link to comment Share on other sites More sharing options...
sanilbd Posted July 16, 2009 Report Share Posted July 16, 2009 Thanks for the sharing given this great info. Keep it up guys. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.