lewisyfz450 Posted June 24, 2009 Report Share Posted June 24, 2009 I have a complte J arm 87 banshee that runs really hard for what it is. it has all new bearints seals and bushings everywhere. It has a new chain new cluch and thorttle cable new just buffd tires all around they are 21 x 7 x 10 mohawk front 22 x 12 x 8 12 paddles 78 roll out on back. It has T6 pipes on it. the motor has a trud and wielded crank with longer rods with 67 mm bore with stock cylinders that are a dune drag portt by andy from m&m it has a new cluch with a billet basket a new trany a cool head. andy told me that with 35mm carbs and v3 reeds it would make 65 70 hp right now i have stock reeds and carbs and that makes a lot more torque you can fell the difference. the bike has dragon glass plastic The 421 cub is a 68mm bore with a 4 mil crank and cub cylinders the motor was build and ported by Matt Haynes and had it in a bike of his and it ran low 3.90s and high 3.80s My best time at atoka was a 4.002 and im a 185 lbs rider and not a great one http://forums.[censord].com/index.php?...=4253&st=20 it has a lockup and billet cover and a billet water pump cover and flywheel cover. It has a 1-5 neatural down override it does not have intakes and carbs but it does have reeds that was custom made for it. i dont know what the domes or but they are for alky the squish is 47 and 45 right where matt still want it at the motor has low hours on the new pistons I would like to trade for 1 Cash 2 250r 4 wheeler (88) 3 250r 4 wheeler (86) 4 Grizzly 660 or 700 5 Grizzly 350 http://www.bansheehq.com/forums/index.php?...p;#entry1022303 Quote Link to comment Share on other sites More sharing options...
Sandfrk33 Posted June 25, 2009 Report Share Posted June 25, 2009 PM sent Quote Link to comment Share on other sites More sharing options...
lewisyfz450 Posted June 25, 2009 Author Report Share Posted June 25, 2009 bump Quote Link to comment Share on other sites More sharing options...
lewisyfz450 Posted June 26, 2009 Author Report Share Posted June 26, 2009 does anyone have a grazzly or rhino for trade Quote Link to comment Share on other sites More sharing options...
lewisyfz450 Posted June 27, 2009 Author Report Share Posted June 27, 2009 bump Quote Link to comment Share on other sites More sharing options...
lewisyfz450 Posted June 28, 2009 Author Report Share Posted June 28, 2009 bump Quote Link to comment Share on other sites More sharing options...
Meat Posted June 28, 2009 Report Share Posted June 28, 2009 Your location information would be helpful to know Quote Link to comment Share on other sites More sharing options...
lewisyfz450 Posted June 29, 2009 Author Report Share Posted June 29, 2009 Your location information would be helpful to know duncan ok Quote Link to comment Share on other sites More sharing options...
lewisyfz450 Posted June 30, 2009 Author Report Share Posted June 30, 2009 I have a complte J arm 87 banshee that runs really hard for what it is. it has all new bearints seals and bushings everywhere. It has a new chain new cluch and thorttle cable new just buffd tires all around they are 21 x 7 x 10 mohawk front 22 x 12 x 8 12 paddles 78 roll out on back. It has T6 pipes on it. the motor has a trud and wielded crank with longer rods with 67 mm bore with stock cylinders that are a dune drag portt by andy from m&m it has a new cluch with a billet basket a new trany a cool head. andy told me that with 35mm carbs and v3 reeds it would make 65 70 hp right now i have stock reeds and carbs and that makes a lot more torque you can fell the difference. the bike has dragon glass plastic The 421 cub is a 68mm bore with a 4 mil crank and cub cylinders the motor was build and ported by Matt Haynes and had it in a bike of his and it ran low 3.90s and high 3.80s My best time at atoka was a 4.002 and im a 185 lbs rider and not a great one http://forums.atvdragracers.com/index.php?...=4253&st=20 it has a lockup and billet cover and a billet water pump cover and flywheel cover. It has a 1-5 neatural down override it does not have intakes and carbs but it does have reeds that was custom made for it. i dont know what the domes or but they are for alky the squish is 47 and 45 right where matt still want it at the motor has low hours on the new pistons I would like to trade for 1 Cash i would like 3000 for the banshee and 2400 for the motor but times are hard i know so talk and see what we can do 2 250r 4 wheeler (88) 3 250r 4 wheeler (86) 4 Grizzly 660 or 700 5 Grizzly 350 Quote Link to comment Share on other sites More sharing options...
lewisyfz450 Posted July 1, 2009 Author Report Share Posted July 1, 2009 bump Quote Link to comment Share on other sites More sharing options...
lewisyfz450 Posted July 2, 2009 Author Report Share Posted July 2, 2009 bump Quote Link to comment Share on other sites More sharing options...
lewisyfz450 Posted July 3, 2009 Author Report Share Posted July 3, 2009 bump Quote Link to comment Share on other sites More sharing options...
lewisyfz450 Posted July 10, 2009 Author Report Share Posted July 10, 2009 come on guys someone give me a number i want to sale this stuff Quote Link to comment Share on other sites More sharing options...
lewisyfz450 Posted July 16, 2009 Author Report Share Posted July 16, 2009 bump Quote Link to comment Share on other sites More sharing options...
lewisyfz450 Posted July 17, 2009 Author Report Share Posted July 17, 2009 make a offer Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.