springer Posted June 18, 2009 Report Share Posted June 18, 2009 (edited) so i got some fresh parts from jeff at FAST. Had to get the billet intake so my carbs will clear the clutch arm. went to put them on and now one of the carbs is hitting the exhaust pipe. i pulled my exhaust as close to the frame as i could with a pipe clamp, but its still in the way. the carbs is super close to hitting in the pics i took, but it is still tilted sideways a bit. what do i do? anyone else ever have this problem? Edited June 18, 2009 by springer Quote Link to comment Share on other sites More sharing options...
Toomey Banshee Posted June 19, 2009 Report Share Posted June 19, 2009 Try some washers where the pipes bolt to the frame to move it out a bit. Quote Link to comment Share on other sites More sharing options...
springer Posted June 19, 2009 Author Report Share Posted June 19, 2009 the pipe is pretty much touching the frame so it cant go over much more. i guess i'm not really concerned with the carb touching the pipe, more worried about the carb leaning at the angle that it is. not real familiar with carbs and thought maybe with it at an angle, the floats would not work right or something. dont know, should i even worry about it?? Quote Link to comment Share on other sites More sharing options...
Overboost Posted June 20, 2009 Report Share Posted June 20, 2009 start by getting rid of that stock head, that is half your problem right there. then I would try some different clamps, them things are pretty wide, nice but made for stock carbs. get some nice billet round ones. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.