Loc Posted June 17, 2009 Report Share Posted June 17, 2009 (edited) I am wondering what company is used the most to do engine porting and what everyones opinion is on the work done. If you use someone other than site sponsor please name it and what you think of the porting. Edited June 17, 2009 by loc Quote Link to comment Share on other sites More sharing options...
jbooker82 Posted June 17, 2009 Report Share Posted June 17, 2009 I have a FAST 4mill Dune port. I am happy with it. It has a really strong midrange and top end. www.farmandsandtoys.com I have also had a Patriot Racing 4mill Drag port. I ran it before my fast dune port. It ran super strong on the top end. It was a good drag port, but I needed somethign with more of a midrange. www.patriotracing.net Quote Link to comment Share on other sites More sharing options...
sleeper06 Posted June 17, 2009 Report Share Posted June 17, 2009 I have a full drag port from FAST,its a hairy ride,plenty of bottom and middle too,I have also tuned bikes from passion,hjr,speedfreaks,homeported bikes,nothing runs like mine,but set-up to complement the port is just as important Quote Link to comment Share on other sites More sharing options...
dragbanshee98 Posted June 17, 2009 Report Share Posted June 17, 2009 john lawrence racing engines... local guy that does fenominal work on anything 2 stroke... he was my first choice even before i found out that even D&D racing cant touch this guys work Quote Link to comment Share on other sites More sharing options...
GrMeyer Posted June 17, 2009 Report Share Posted June 17, 2009 I have GTravis Racing's Dune port and loved it...Only have about an hour of ride time tell my bottom end blew up on me so im working a on a True and Weld Quote Link to comment Share on other sites More sharing options...
VegasJeff Posted June 17, 2009 Report Share Posted June 17, 2009 I have GTravis Racing's Dune port and loved it...Only have about an hour of ride time tell my bottom end blew up on me so im working a on a True and Weld HJR drag port with stock swingarm. I aint scared! Quote Link to comment Share on other sites More sharing options...
mopar1rules Posted June 17, 2009 Report Share Posted June 17, 2009 i did my own port work. always have and always will. then you can't blame anybody but yourself, if something is wrong, or goes wrong.....LOL. also, i enjoy learning this stuff and tuning/modding my own stuff. Quote Link to comment Share on other sites More sharing options...
Meat Posted June 17, 2009 Report Share Posted June 17, 2009 Guy named Bill Adams gave mine an MX port job Quote Link to comment Share on other sites More sharing options...
hercalmighty Posted June 17, 2009 Report Share Posted June 17, 2009 I went with Kevin. I got a 4mil Dune Port matched for CPI's. Im very impressed with the way it hits. I was expecting a nasty rush from the mid to top but its so smooth that its almost deceiving. I really like it alot. I would love to try some other builders bikes though to really see how they compare. Quote Link to comment Share on other sites More sharing options...
FireHead Posted June 17, 2009 Report Share Posted June 17, 2009 Mostly I have done all of the work myself. I have had work done by Twister and Cascade in the past. Quote Link to comment Share on other sites More sharing options...
Snopczynski Posted June 17, 2009 Report Share Posted June 17, 2009 Dynoport, and by myself. Quote Link to comment Share on other sites More sharing options...
banshee332 Posted June 17, 2009 Report Share Posted June 17, 2009 (edited) Everyone Knows who ports my stuff I would guess. Jim from passion racing. He has all keep me on top with a much smaller motor, so no complaints very good builder/guy to deal with Edited June 17, 2009 by banshee332 Quote Link to comment Share on other sites More sharing options...
Badasshee Posted June 17, 2009 Report Share Posted June 17, 2009 Everyone Knows who ports my stuff I would guess. Jim from passion racing. He has all keep me on top with a much smaller motor, so no complaints very good builder/guy to deal with Wildcard Racing is building me a 4mil dune drag bike. Quote Link to comment Share on other sites More sharing options...
DallasGDub Posted June 17, 2009 Report Share Posted June 17, 2009 Kevin did mine. Very high quality work. The craftsmanship, customer service, all top notch. He makes one very strong motor. I have seen both Passion and FAST run in person, and I would be happy to own 2 more Banshee's just to get one from each. They all run crazy fast. Quote Link to comment Share on other sites More sharing options...
JasonsBanshee Posted June 17, 2009 Report Share Posted June 17, 2009 Jeff at F.A.S.T. has mine right now. I'm getting the cases ported and epoxied along with an aggressive Play/Dune port for my 4mil. Jeff is really good at what he does and has top notch customer service. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.