fordlord Posted June 5, 2009 Report Share Posted June 5, 2009 I am building a custom off-road golf cart that is using Banshee A-arm front suspension. I purchased all of the parts that I need on Ebay, but I don't have a frame to get dimensions from for building my mounting points. I was hoping someone has the dimensions or could measure their frame for me. I'm looking for the following dimensions: -Upper A-arm mount width from left side to right side (front tab, bolt hole to bolt hole) -Upper A-arm mount width from left side to right side(rear tab, bolt hole to bolt hole) -Lower A-arm mount width from left side to right side(front tabs, bolt hole to bolt hole) -Lower A-arm mount width from left side to right side(rear tabs, bolt hole to bolt hole) -Height between upper and lower A-arm mounts (bolt hole to bolt hole) -Stagger distance that lower A-arm is behind Upper A-arm I would really appreciate it if someone can help me out with this. Thanks, Nathan Quote Link to comment Share on other sites More sharing options...
bbcmudtruck Posted June 5, 2009 Report Share Posted June 5, 2009 -Upper A-arm mount width from left side to right side (front tab, bolt hole to bolt hole) = 8 5/8 -Upper A-arm mount width from left side to right side(rear tab, bolt hole to bolt hole) = 8 5/8 -Lower A-arm mount width from left side to right side(front tabs, bolt hole to bolt hole) = 7 3/4 -Lower A-arm mount width from left side to right side(rear tabs, bolt hole to bolt hole) = 7 7/8 -Height between upper and lower A-arm mounts (bolt hole to bolt hole) = 6" -Stagger distance that lower A-arm is behind Upper A-arm = Just by holding the tape measure up and eyeballing the front tab of the lower arm appears to be about 1 5/8" behind the top front tab. Hope that helps ya. Now you need to fit a banshee motor in your golf cart and tear it up! Quote Link to comment Share on other sites More sharing options...
fordlord Posted June 5, 2009 Author Report Share Posted June 5, 2009 -Upper A-arm mount width from left side to right side (front tab, bolt hole to bolt hole) = 8 5/8 -Upper A-arm mount width from left side to right side(rear tab, bolt hole to bolt hole) = 8 5/8 -Lower A-arm mount width from left side to right side(front tabs, bolt hole to bolt hole) = 7 3/4 -Lower A-arm mount width from left side to right side(rear tabs, bolt hole to bolt hole) = 7 7/8 -Height between upper and lower A-arm mounts (bolt hole to bolt hole) = 6" -Stagger distance that lower A-arm is behind Upper A-arm = Just by holding the tape measure up and eyeballing the front tab of the lower arm appears to be about 1 5/8" behind the top front tab. Hope that helps ya. Now you need to fit a banshee motor in your golf cart and tear it up! Thanks a bunch. Now I can finish my cart. I will not rest untill it does wheelies! I really appreciate the help! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.