ROBK Posted June 1, 2009 Report Share Posted June 1, 2009 Hello Banshee masters, A quick question for you guys, im having problems shifting when im in hi rev, then I have to let off the throttle and almost force it into the next gear. Only having this problem in 3rd, 4th, 5th, 6th Time to replace clutch? I am not sure what the problem is, If someone can help me out that would be great, Thank you, Rob Quote Link to comment Share on other sites More sharing options...
okbeast Posted June 1, 2009 Report Share Posted June 1, 2009 Get you a Clymers, you can download one off the site somewhere. Check all the adjustments in your clutch from the clutch arm on top of the cases to the shift shaft and eccentric nut. Quote Link to comment Share on other sites More sharing options...
yamaha11 Posted June 1, 2009 Report Share Posted June 1, 2009 do you have a high hp motor, cuz mine did this when i had a stock trans in my motor that made 76 hp on the dyno and it would not shift worth a shit Quote Link to comment Share on other sites More sharing options...
ROBK Posted June 1, 2009 Author Report Share Posted June 1, 2009 do you have a high hp motor, cuz mine did this when i had a stock trans in my motor that made 76 hp on the dyno and it would not shift worth a shit THANKS GUYS, I will check all adjustments again, as for the motor its not a high hp motor. fmf pipes v force reeds I think the carbs have been changed and a mild port job when I got the top end done. I dont know much about this quad, just learning from this site I guess I have one more question, Adjustable timing plate ? please tell me your thoughts, Once again Thank you for all the help Rob Quote Link to comment Share on other sites More sharing options...
okbeast Posted June 1, 2009 Report Share Posted June 1, 2009 Timing plates are a cheap bang for your buck. Get it, and a flywheel puller (banshee only, no 3-prong puller) and slap the timing plate on, set it at +4 or so and go from there. It'll give ya some more bottom end and power all over. Quote Link to comment Share on other sites More sharing options...
ROBK Posted June 1, 2009 Author Report Share Posted June 1, 2009 Wouldnt happen to know where I can get the timing plate on line ?????? Quote Link to comment Share on other sites More sharing options...
okbeast Posted June 1, 2009 Report Share Posted June 1, 2009 (edited) http://cgi.ebay.com/ebaymotors/NEW-ADJUSTA...%3A1|240%3A1318 Chariot Performance has a nice product but I can never find his website or ebay page. Just kidding, here's the chariot piece. http://cgi.ebay.com/ebaymotors/Banshee-606...%3A1|240%3A1318 Edited June 1, 2009 by okbeast Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.