fastrthnu Posted May 28, 2009 Report Share Posted May 28, 2009 Ive about got my quad back together. but since Ive gotten the yfz, I havent had much desire to play with the banshee. I have it set up for a better than average woods and minor mx. If it doesnt sell, I may keep parts of it. Im thinking since I have a bike for the majority of my riding I might make an asphalt quad. Either out of my existing frame if I part out, or just starting over. I havent been on it in a looooong time. maybe Ill change my mind once I get back on. Id like to have just a faster than shit 1/8 mile rocket though too. Im a religious person and its agains my religeon to have a multi purpose quad either its all out or fuck it. Quote Link to comment Share on other sites More sharing options...
Keyser Soze Posted May 28, 2009 Report Share Posted May 28, 2009 If you have had it for awhile and been upgrading it, its really hard to get a decent return on your mods. Id keep it, mx/woods stuff. Try to buy what you need to drag. My .02 Quote Link to comment Share on other sites More sharing options...
AKheathen Posted May 28, 2009 Report Share Posted May 28, 2009 what parts/mods you got for mx/woods? you can just change things up, so you won't be kicking your self when it's gone. build it to do what the 450 doesn't. and for fuck sake, take her out for a spin! Quote Link to comment Share on other sites More sharing options...
fastrthnu Posted May 28, 2009 Author Report Share Posted May 28, 2009 what parts/mods you got for mx/woods? you can just change things up, so you won't be kicking your self when it's gone. build it to do what the 450 doesn't. and for fuck sake, take her out for a spin! I think I have all of them minus a 250r geo frame. here is a copy/paste from my profile..... Motor: yfz 350 cases, trans. RZ shift forks, YPVS rz powervalve cylinders with passion racing 12 port, +4mm hotrods crank, wiseco 65.5mm 795`s, Milled head, clearanced for stroke, 182psi, burns vp 110/93 @ 102 octane, lightened flywheel, billet clutch, fast plates, billet impeller, 200w rz stator, rocket pipes, boyeseen 2 stage carbon fiber reeds, 34mm mikuni tm flatslide carbs, pods n outers, 14 tooth. Wheelbase is -1" over stock, 52" wide outside to outside of tires of bike, and 50" wide at rear. -2 swinger. +4 g-force. douglas front, hyper rears. +3 a arms ties, braided lines. Elka pig rez shocks. std travel. I wouldnt use much of this. My hypers are goin on the yfz. I may swap the yfz front to the shee and sell the front end off for a long travel set on the yfz. most of the motor would go if not all. Id want a taller stroke and bore. the whole rear would go. would prob burn meth. instead of gas. ect ect. Quote Link to comment Share on other sites More sharing options...
peterlocal22 Posted May 28, 2009 Report Share Posted May 28, 2009 dont sell it two quads are imp. for when one goes down, lol Quote Link to comment Share on other sites More sharing options...
LiftdT4R Posted May 28, 2009 Report Share Posted May 28, 2009 Are the cyls from Broke's old RZ Shee with the 250R geo frame? Sounds like you have a helluva bike there. Quote Link to comment Share on other sites More sharing options...
fastrthnu Posted May 29, 2009 Author Report Share Posted May 29, 2009 Are the cyls from Broke's old RZ Shee with the 250R geo frame? Sounds like you have a helluva bike there. yes, I got the cyls, crank, harness and pipe soff broke. Quote Link to comment Share on other sites More sharing options...
AKheathen Posted May 29, 2009 Report Share Posted May 29, 2009 you have everything to make the rz work? i get my anual in september or october. if you want to do a winter build on her, than, i'll have some coin to throw at some of that, plus it gives you more time to play with it before you switch it up. what kind of port is the 12 port? Quote Link to comment Share on other sites More sharing options...
LiftdT4R Posted May 29, 2009 Report Share Posted May 29, 2009 yes, I got the cyls, crank, harness and pipe soff broke. That is def a good setup, Broke definately knew what he was doing on that RZ engine. If I was going to do an RZ shee that is the route I would go. Quote Link to comment Share on other sites More sharing options...
fastrthnu Posted June 4, 2009 Author Report Share Posted June 4, 2009 yes I have everything for it to work. Ive run it quite a few times. its a passion racing 12 port. If you have any woods, trailes, sx, ect rec riding to do, its is the way to go. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.