Jump to content

K&N


Recommended Posts

I've always used the recharge cleaning shit.Has anyone tried anything else?I use other shit on foams but not on the K&N's.I am out of the cleaning stuff and just was checking.Thanks.

 

 

 

 

ive used dish detergent and it works great!!, just let it soak in a bucket of warm water with dish detergent and then scrubbed with a tooth brush, it works just as well....no sure if its damaging the filter or not though so ahha do what u wanna...but i havent had anyproblems with mine..

Link to comment
Share on other sites

well my k&n pods cost me like 65$ i would recomend using ther cleaning product or dishsoap(ive used dishsoap on foam filters works great) But i wouldnt scrub it, the original directions say not to scrub, just knock the execss dirt loose go riding until you get cleaner. :cool:

Edited by kawa110
Link to comment
Share on other sites

plain hand cleaner works awesome-not the shit with pumice the smooth stuff

Link to comment
Share on other sites

I was going to ask the same questing because it seems i go through the cleaner fast then I do the oil... and i clean mine after every dune trip or every two-three woods riding. and I have 7 bikes and a rhino i have to clean... so this shit adds up!!!

Link to comment
Share on other sites

I was going to ask the same questing because it seems i go through the cleaner fast then I do the oil... and i clean mine after every dune trip or every two-three woods riding. and I have 7 bikes and a rhino i have to clean... so this shit adds up!!!

 

 

roger that!

Link to comment
Share on other sites

I currently have a can of klotz air filter cleaner and a can of klotz fabric air filter oil. The cleaner took k&n's oil right out of the filter. It comes in a aerosol can so no more pumping.

 

The oil is a light green or blue. The dye isn't verry strong so it is hard to tell when you have enough on. I ended up way over oiling my filters.

 

Maxima has a fab1 foam and fabric oil. I have used it on foam filters. I wouldn't use it on a fabric filter. It is so sticky I don't think you would ever get it out.

 

I think I am going to stick with klotz cleaner and k&n oil.

Link to comment
Share on other sites

I currently have a can of klotz air filter cleaner and a can of klotz fabric air filter oil. The cleaner took k&n's oil right out of the filter. It comes in a aerosol can so no more pumping.

 

The oil is a light green or blue. The dye isn't verry strong so it is hard to tell when you have enough on. I ended up way over oiling my filters.

 

Maxima has a fab1 foam and fabric oil. I have used it on foam filters. I wouldn't use it on a fabric filter. It is so sticky I don't think you would ever get it out.

 

I think I am going to stick with klotz cleaner and k&n oil.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...