aust_banshee Posted May 8, 2009 Report Share Posted May 8, 2009 couple of guys I ride with bought second hand race honda with all the works. Shocks, pistons, cams, exhaust, computer, filter etc. I ride a banshee with pipes and reeds. I want to beat them, what do I need to do? I have beat one of them with a heavy rider but was beaten by about 4 bike lengths with light rider. Another I can come close to and the third I have not raced but apparently he is the fastest. One has a clutchless bike too. I run a sand ghecko, but wondering if I should run those tyres that come with standard Honda? Quote Link to comment Share on other sites More sharing options...
Loc Posted May 8, 2009 Report Share Posted May 8, 2009 Race with better paddles (Haulers, or Sandstars). I would go with timing at +4, air filters, cool head and a port job. After that you should be stomping them. What pipes do you have Quote Link to comment Share on other sites More sharing options...
aust_banshee Posted May 8, 2009 Author Report Share Posted May 8, 2009 I have filter. They're stage IV trinitys and vf3. How do you change the timing Quote Link to comment Share on other sites More sharing options...
jesse1004 Posted May 9, 2009 Report Share Posted May 9, 2009 ditch the sand geckos and get some straight paddles. porting is going to be the biggest thing you can do to your bike. and you need an adjustable timing plate to change your timing. but all the bolt ons in the world wont give you the same horsepower as a few hundred dollars in porting. Quote Link to comment Share on other sites More sharing options...
TwistedSheeRida Posted May 9, 2009 Report Share Posted May 9, 2009 give the bike some throttle and youll win Quote Link to comment Share on other sites More sharing options...
bada450r Posted May 9, 2009 Report Share Posted May 9, 2009 all the information given so far on this thread is very helpful.....all you guys should think about openning a performance banshee shop toghether.......nice :shoothead: Quote Link to comment Share on other sites More sharing options...
Titan up Posted May 9, 2009 Report Share Posted May 9, 2009 Honda 450 with a computer?? Quote Link to comment Share on other sites More sharing options...
SAVAGE420 Posted May 9, 2009 Report Share Posted May 9, 2009 First go grab a tape measure. Second, reach in your back pocket and pull out your wallet. Third, measure the thickness of it and tell us how fat it is. Then we can tell you how fast you can go. Its all about how much money you want to lay down to be "fast".IMO :biggrin: It don't take to much money into a banshee really, to beat bolt on 450's in a drag race. Quote Link to comment Share on other sites More sharing options...
Titan up Posted May 9, 2009 Report Share Posted May 9, 2009 :yelrotflmao: First go grab a tape measure. Second, reach in your back pocket and pull out your wallet. Third, measure the thickness of it and tell us how fat it is. Then we can tell you how fast you can go. Its all about how much money you want to lay down and fast.IMO:biggrin: It don't take to much money into a banshee really to beat bolt on 450's in a drag race. Hahaha that made me laugh. that was fuckin funny. :yelrotflmao: Quote Link to comment Share on other sites More sharing options...
Loc Posted May 10, 2009 Report Share Posted May 10, 2009 all the information given so far on this thread is very helpful.....all you guys should think about openning a performance banshee shop toghether.......nice :shoothead: Not sure whats up with this comment . But some easy boltons and a good rider and you could get it done. Quote Link to comment Share on other sites More sharing options...
trademark Posted May 15, 2009 Report Share Posted May 15, 2009 this is my 450 and it get s the job done but i also just got myself a shee cause it gos and gos this 450 with a 275 man on its back runs 4.3 in 300ft all day on motor. anyway picture is to large to post Quote Link to comment Share on other sites More sharing options...
BoostedRex Posted May 15, 2009 Report Share Posted May 15, 2009 I have filter. They're stage IV trinitys and vf3. How do you change the timing You need to ditch those trinity's first of all and get some CPI's, that will give you 3-4 bikes EASY. Quote Link to comment Share on other sites More sharing options...
RagunCajun Posted May 15, 2009 Report Share Posted May 15, 2009 Not sure whats up with this comment . But some easy boltons and a good rider and you could get it done. What he probably means is yall are under estimating a 450 with a lot of work done to it and more importantly SET UP right. Your gonna need more than the stuff listed. You might end up having to set up the bike so different it wont be much of a play bike anymore. It might be closer to a drag only bike. When you got spanked by 4 lengths, were you spinning at all any time in the race? Also by "clutchless" do you mean the guy had an override? Meaning he can up-shift w/o using the clutch while WOT? Quote Link to comment Share on other sites More sharing options...
Mofo69 Posted May 15, 2009 Report Share Posted May 15, 2009 What he probably means is yall are under estimating a 450 with a lot of work done to it and more importantly SET UP right. Your gonna need more than the stuff listed. You might end up having to set up the bike so different it wont be much of a play bike anymore. It might be closer to a drag only bike. When you got spanked by 4 lengths, were you spinning at all any time in the race? Also by "clutchless" do you mean the guy had an override? Meaning he can up-shift w/o using the clutch while WOT? I think he was talking about a recluse clutch. I rode a 450 with one it you can set it to engage at diffrent rpms, and just let of a little when you shift. Quote Link to comment Share on other sites More sharing options...
Mofo69 Posted May 15, 2009 Report Share Posted May 15, 2009 My bike is a 4mil with lrd pipes, v3s, F.A.S.T dune port dual 35'd. I can walk all over my buddies TRX450r that has a cam, and 12:1 piston, and exhaust. Another buddy has a TRX480R that has a high comp piston, cam, and head work, and exhaust, and it is pretty much who evey gets the best start. My bike could use some tuning to get the full potential. SRedish better watch out when I get my stickers....LOL Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.