Anyone using these?

[sandnut]

I just wanted to see if anyone had tried this slider and rollers. You can change the slider and guide without removing the swingarm and chain. I am getting ready to put a new swingarm on and found these. Please let me know what you guys think.

http://hotfootmoto.com/Site_2/Yamaha_ATVS.html

[shanYE west]

Looks similar to UPP.. Give it a whirl.

[captainhowdie]

Looks similar to UPP.. Give it a whirl.

Just bought a set and installed them they seem to be nice

[CoreyReid]

bought a set last week, will post reply when i get them installed

[Quadatic20]

I got to get a set of these, sure wish they had orange. I guess black will do.

[dajogejr]

This is always what I've used in the past. Looks like the kit you posted is 5 cheaper plus free shipping..let us know how they work out.

 

http://www.magicracing.com/UPP-Chain-Slide...tor_p_1058.html

 

 

[blubberbutt]

Although it's not on a Banshee, I just put a set on my '97 Warrior from hotfootmoto. The front swingarm guide was a bit of a bitch to get on because there is a screw on the bottom of it that secures it .. I had a hell of a time lining up the screw hole on the bottom with the one on the top part ... I finally got it by using a large pair of channel locks & squeezing the hell out of the front of the guide. Other than that it looks like it's gonna work just fine.

[peterlocal22]

look pretty cool

[Woody 350]

Although it's not on a Banshee, I just put a set on my '97 Warrior from hotfootmoto. The front swingarm guide was a bit of a bitch to get on because there is a screw on the bottom of it that secures it .. I had a hell of a time lining up the screw hole on the bottom with the one on the top part ... I finally got it by using a large pair of channel locks & squeezing the hell out of the front of the guide. Other than that it looks like it's gonna work just fine.

I have a set on my shee. Had the same issue with the swingarm and used the same method you did. I like them and the red looks awesome on my banshee.

[2strokesmoker]

I have a set on my shee. Had the same issue with the swingarm and used the same method you did. I like them and the red looks awesome on my banshee.

 

 

I liked mine they installed great. Just wish i had my parts from the dealer... Any body got the rubber plugs that go in the bottom of the cylinders? Pm me if you got em!!!

[NickisGod]

i got mine in red a few days after my chain wipped my case and cracked it. the new engine will be in sometime next week then ill know how good they are.

[shawn941]

Although it's not on a Banshee, I just put a set on my '97 Warrior from hotfootmoto. The front swingarm guide was a bit of a bitch to get on because there is a screw on the bottom of it that secures it .. I had a hell of a time lining up the screw hole on the bottom with the one on the top part ... I finally got it by using a large pair of channel locks & squeezing the hell out of the front of the guide. Other than that it looks like it's gonna work just fine.

lmfao.....i had to do the exact same thing. it was a major bitch,,,they work good tho