kb247 Posted April 21, 2009 Report Share Posted April 21, 2009 Stator and studs on the way! Quote Link to comment Share on other sites More sharing options...
moneybags Posted April 27, 2009 Report Share Posted April 27, 2009 Clutch, clutch springs, base gaskets, clutch rod and ball. shipped out today. Quote Link to comment Share on other sites More sharing options...
MarineNYC Posted April 27, 2009 Report Share Posted April 27, 2009 So this is what we need to complete this motor build. 1. Stator 2. Flywheel, woodruf key and nut 3. Clutch 4. Clutch Pressure Plate, springs and bolts 5. Tranny shifter shaft 6. Eccentric Bolt, Nut and retainer 7. 8 Head Nutz 8. 8 Case Nutz (The ones that hold the cases together underneath the crank) 9. All the top bolts to the top of the case that hold the cases together 10. Clutch cable holder and bolt (The black holder on top of the case) 11. Waterneck that goes into the side of the case (along with o ring and retainer clip) 12. Case seal kit 13. The 3 retaining clips for the tranny bearings and crank bearing (I may have these already) 14. Base Gasket 15. Clutch adjuster and ball 16. Cool head studs and o ring kit 17. Clutch Cover gasket 18. 3 Stator plate bolts 19. kicker gear I will update this as I find parts and receive parts, or add anything I may have forgotten. OMG I fucking just threw away half that shit from my new clutch installation. Im sorry guys. Quote Link to comment Share on other sites More sharing options...
1996dragshee Posted April 27, 2009 Report Share Posted April 27, 2009 i got a few parts..pm sent -Steve Quote Link to comment Share on other sites More sharing options...
shanYE west Posted April 28, 2009 Report Share Posted April 28, 2009 I got intakes and balance tube boxed along with the sprocket nut and washer. I just gotta find the water pump parts.. oh.. and I got the kicker lever. Quote Link to comment Share on other sites More sharing options...
9FR Productions Posted April 28, 2009 Report Share Posted April 28, 2009 I got intakes and balance tube boxed along with the sprocket nut and washer. I just gotta find the water pump parts.. oh.. and I got the kicker lever. I don't know Austin but reading what you guys say about him, he must be a great guy. I have CASH (Not alot) where do I send it? PM me please..... Quote Link to comment Share on other sites More sharing options...
1996dragshee Posted April 28, 2009 Report Share Posted April 28, 2009 I don't know Austin but reading what you guys say about him, he must be a great guy. I have CASH (Not alot) where do I send it? PM me please..... Yea Austin is a very cool dude.I've never personally met him but we've bullshitted here and their.He's always willing to lend a hand to help somebody.Glad to see this is happening for him being the situation and decision he made to make the spare change happen for his family.I'm happy to help out any way i can also. Quote Link to comment Share on other sites More sharing options...
moneybags Posted May 8, 2009 Report Share Posted May 8, 2009 Austin is a cool ass cat. Bump for a good guy. Quote Link to comment Share on other sites More sharing options...
bada450r Posted May 8, 2009 Report Share Posted May 8, 2009 austin so what else is needed?i want to see this thing toghether so off your ass and get it done Quote Link to comment Share on other sites More sharing options...
Koolguyson Posted May 8, 2009 Report Share Posted May 8, 2009 Austin is a great guy. If there is anything at all you guys still need, please let me know. I would love to help out. 1 Quote Link to comment Share on other sites More sharing options...
YamahaMama Posted May 8, 2009 Report Share Posted May 8, 2009 Thats really nice of you guys. I will look around and see if I have anything.. PS he is a great guy! :biggrin: Quote Link to comment Share on other sites More sharing options...
Stellar Performance Posted May 8, 2009 Report Share Posted May 8, 2009 Pistons came in yesturday. I'll try to get the cyllinders bored today!!! Quote Link to comment Share on other sites More sharing options...
Onesickcrewcab Posted May 9, 2009 Report Share Posted May 9, 2009 So this is what we still need to get Austin up and running. 1. Kicker Gear 2. Flywheel, woodruff key, and nut. 3. Transmission shifter shaft. 4. Eccentric bolt, nut, and retainer. 5. Case seal kit. 6. Clutch cover gasket. I want to give a big thanks to everyone who contributed to the welfare build! Austin is a great personal friend of mine, and I can tell you he is very excited to get this bike rolling. Quote Link to comment Share on other sites More sharing options...
Stellar Performance Posted May 9, 2009 Report Share Posted May 9, 2009 I'll check this weekend, but I think I might have all of that covered! Quote Link to comment Share on other sites More sharing options...
Stellar Performance Posted May 14, 2009 Report Share Posted May 14, 2009 Alright guys. Im shipping out the freshly bored top end with new weiscos, and everything else that chad posted minus the oil seals. If anyone has a oil seal kit, it would be great to dontate it. Thanks again to everyone that has helped. :thumbsup: Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.