lilgrizz Posted March 29, 2009 Report Share Posted March 29, 2009 Hi guys I need some help. I am running fmf fatty's with power core 2's it was recently bored 0.30 over from what I was told has boysen rad valves with pro reeds and boost bottle. I am running a K+N air filter wit lid no snorkel and holes drilled in it. The jetting is 280 main stock pilot with the needle on the middle clip.It is smoking white smoke both cylinders and bogging the plugs are getting oil on them too Quote Link to comment Share on other sites More sharing options...
byrdmanracing Posted March 29, 2009 Report Share Posted March 29, 2009 Hi guys I need some help. I am running fmf fatty's with power core 2's it was recently bored 0.30 over from what I was told has boysen rad valves with pro reeds and boost bottle. I am running a K+N air filter wit lid no snorkel and holes drilled in it. The jetting is 280 main stock pilot with the needle on the middle clip.It is smoking white smoke both cylinders and bogging the plugs are getting oil on them too what is ur fuel mix Quote Link to comment Share on other sites More sharing options...
lilgrizz Posted March 29, 2009 Author Report Share Posted March 29, 2009 what is ur fuel mix I am running yamalube 32.1 Quote Link to comment Share on other sites More sharing options...
byrdmanracing Posted March 29, 2009 Report Share Posted March 29, 2009 ur running rich. where r u from? Quote Link to comment Share on other sites More sharing options...
lilgrizz Posted March 29, 2009 Author Report Share Posted March 29, 2009 ur running rich. where r u from? NorthEast Pennslyvania the elevation is 1350 Quote Link to comment Share on other sites More sharing options...
byrdmanracing Posted March 29, 2009 Report Share Posted March 29, 2009 ill try dropping the needle it should be on the 2nd clip. im running 330 on the 2nd clip and 50:1 mix. im 60mm over on the pistons. so drop the needle and see if that helps. o ya how many turns is u fuel srew? Quote Link to comment Share on other sites More sharing options...
lilgrizz Posted March 29, 2009 Author Report Share Posted March 29, 2009 ill try dropping the needle it should be on the 2nd clip. im running 330 on the 2nd clip and 50:1 mix. im 60mm over on the pistons. so drop the needle and see if that helps. o ya how many turns is u fuel srew? The fuel screw is 1.5 out Quote Link to comment Share on other sites More sharing options...
banman350 Posted April 5, 2009 Report Share Posted April 5, 2009 rings are gone. rebuild it Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.