studroes Posted March 20, 2009 Report Share Posted March 20, 2009 when domes are milled out for a stroker does it change the actual dome size in anyway? ie: when regular 20cc domes are milled out does it bring the dome size to say 19 or 18cc for example? Quote Link to comment Share on other sites More sharing options...
jbooker82 Posted March 20, 2009 Report Share Posted March 20, 2009 I would think so if you used standard domes. Most of the time they dont remill the domes, they start out fresh with new blanks. josh Quote Link to comment Share on other sites More sharing options...
brian Posted March 20, 2009 Report Share Posted March 20, 2009 It will absolutely change the volume. More than one or two C.Cs Think about it - - on a 4mil you have to cut at least .080 out of the squish area. That will change the flow and flame patterns as well as the compression. I know people have done this quite a bit, but I would recommend having new ones made. Call NOSS machine. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.