blowit Posted March 12, 2009 Report Share Posted March 12, 2009 We just tested a new cut for a stock head for a 4mm bike with 795s. Ours test bike was only a dune port with toomeys so we would like to get it on a bike with more aggressive tuning and possibly Shearers or CPI OOFs. We are looking to send the head to someone that preferably drag races and familiar with tuning. Head is setup for alky, 795s, Cometic or thin base gaskets. Dyno would be a plus. We will send the head free of charge for testing. If you like it, price will be 75 bucks, if you're not happy or just don't want it, send it back, no charge. If interested, shoot me a PM so we can chat and we can get this head out. Thanks Brandon Quote Link to comment Share on other sites More sharing options...
jbooker82 Posted March 12, 2009 Report Share Posted March 12, 2009 I am glad some one is giving free head samples :beer: Bump for a good guy. Quote Link to comment Share on other sites More sharing options...
payupsucka Posted March 12, 2009 Report Share Posted March 12, 2009 Bump to help out banshee progress. Quote Link to comment Share on other sites More sharing options...
grizzly700 Posted March 12, 2009 Report Share Posted March 12, 2009 Bump to help out banshee progress. it was bumped like 5 min ago. wtf Quote Link to comment Share on other sites More sharing options...
vulvafan537240 Posted March 12, 2009 Report Share Posted March 12, 2009 it was bumped like 5 min ago. wtf and you just bumped it again. now im bumping it :biggrin: Quote Link to comment Share on other sites More sharing options...
zach45 Posted March 12, 2009 Report Share Posted March 12, 2009 ill take free head Quote Link to comment Share on other sites More sharing options...
okbeast Posted March 12, 2009 Report Share Posted March 12, 2009 Got any 68mm ones for a cub? Quote Link to comment Share on other sites More sharing options...
blowit Posted March 12, 2009 Author Report Share Posted March 12, 2009 Got any 68mm ones for a cub? We have cut several for 68s but they make me nervous because there is not much surface area left. We have not had any failures yet though. Have not pushed a 68 to alky specs though either. Brandon Quote Link to comment Share on other sites More sharing options...
blowit Posted March 16, 2009 Author Report Share Posted March 16, 2009 We have had several questions on alcohols so thought I would clarify. The head was tested using Methanol. 100% Ethanol can also be used with a little less timing but E85 should not be used with this head until we can do some tests. We will more than likely have to tune E85 with additives to get acceptable detonation suppression. Brandon Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.