Guest utleybanshee Posted February 20, 2009 Report Share Posted February 20, 2009 looking to trade my trex complete topend 78mm pistons, with head, carbs, pipes, and trenched and ported cases for a complete stock drag motor setup... WHITE KNUCKLE RACING JUST PUT THIS MOTOR TOGETHER 2 MONTHS AGO.. HAS LESS THAN 5 PASSES ON IT...I HAVE ALL RECEIPTS SPENT 4000 ON JUST MOTOR AND CARBS.. will post more pics if interested.. Quote Link to comment Share on other sites More sharing options...
gasmask34 Posted February 20, 2009 Report Share Posted February 20, 2009 looking to trade my trex complete topend 78mm pistons, with head, carbs, pipes, and trenched and ported cases for a complete stock drag motor setup... WHITE KNUCKLE RACING JUST PUT THIS MOTOR TOGETHER 2 MONTHS AGO.. HAS LESS THAN 5 PASSES ON IT...I HAVE ALL RECEIPTS SPENT 4000 ON JUST MOTOR AND CARBS.. will post more pics if interested.. check ur pm Quote Link to comment Share on other sites More sharing options...
kubitza123 Posted February 20, 2009 Report Share Posted February 20, 2009 PM sent Quote Link to comment Share on other sites More sharing options...
flyhighprerunner Posted February 21, 2009 Report Share Posted February 21, 2009 DO THE CYLINDERS NEED WELDING AND ARE THE PISTONS TRASHED OR IS THE SPROCKET NUT WELDED TO THE OUTPUT SHAFT LIKE THE LAST TWO MOTORS YOU HAVE SOLD?? Quote Link to comment Share on other sites More sharing options...
2001Stroker Posted February 21, 2009 Report Share Posted February 21, 2009 Getting rid of the 10mil crank? Quote Link to comment Share on other sites More sharing options...
sheefreak Posted February 21, 2009 Report Share Posted February 21, 2009 DO THE CYLINDERS NEED WELDING AND ARE THE PISTONS TRASHED OR IS THE SPROCKET NUT WELDED TO THE OUTPUT SHAFT LIKE THE LAST TWO MOTORS YOU HAVE SOLD?? Funny you ask. Beware Stroker and everyone else thinking of buying from this Joker. I just took it in the rear for damages undisclosed at time of sale for 10 mil Mccoy motor that he claimed was runnable. $600 later and no help, reimbursment, or any cooperation at all from Utley. I will be posting a long mess w/PM's and all in the complaint section as soon as i get time. You do not want to deal w/this guy!!!! Quote Link to comment Share on other sites More sharing options...
shanYE west Posted February 21, 2009 Report Share Posted February 21, 2009 Funny you ask. Beware Stroker and everyone else thinking of buying from this Joker. I just took it in the rear for damages undisclosed at time of sale for 10 mil Mccoy motor that he claimed was runnable. $600 later and no help, reimbursment, or any cooperation at all from Utley. I will be posting a long mess w/PM's and all in the complaint section as soon as i get time. You do not want to deal w/this guy!!!! I almost picked up that 10mil.. I told him to send it to Nate McCoy (figured Nate was building his new motor he would trust him) first to have him look it over. He said NO... a local builder that I've never heard of did and it was good to go. Said there was nothing wrong with the plating. It could be ran as it is because the wear is above the port rather then below it! This is the motor that sheefreak ended up with. Quote Link to comment Share on other sites More sharing options...
sheefreak Posted February 21, 2009 Report Share Posted February 21, 2009 Let's bump it up for the whole world to see!!!! I will be petitioning for his removal from this and a few other websites. I think enough scamming has been done by this prick! Quote Link to comment Share on other sites More sharing options...
lokisbuddy Posted February 21, 2009 Report Share Posted February 21, 2009 Is that a front clip off a 69 camaro in the pic? whatcha want for that man? Also.........BAD SCAMMER! Quote Link to comment Share on other sites More sharing options...
2001Stroker Posted February 21, 2009 Report Share Posted February 21, 2009 I didn't know that he was shady. I bought this lockout from him on February 13th, through PayPal. Just the lockout, not the cover. I PM'd him yesterday about making sure he got the money, cause I haven't seen it yet, and he said he was shipping out yesterday. If he's going to be playing games with me, then it's on. And I better bet the part that's in the pic, as well as all of all the hardware. Quote Link to comment Share on other sites More sharing options...
sheefreak Posted February 21, 2009 Report Share Posted February 21, 2009 I didn't know that he was shady. I bought this lockout from him on February 13th, through PayPal. Just the lockout, not the cover. I PM'd him yesterday about making sure he got the money, cause I haven't seen it yet, and he said he was shipping out yesterday. If he's going to be playing games with me, then it's on. And I better bet the part that's in the pic, as well as all of all the hardware. That was the first thing that got me worried. He said he was going to give me a tracking #several times before I finally got one. I did get the stuff, just far from as described. Good luck! Quote Link to comment Share on other sites More sharing options...
Guest utleybanshee Posted February 21, 2009 Report Share Posted February 21, 2009 I almost picked up that 10mil.. I told him to send it to Nate McCoy (figured Nate was building his new motor he would trust him) first to have him look it over. He said NO... a local builder that I've never heard of did and it was good to go. Said there was nothing wrong with the plating. It could be ran as it is because the wear is above the port rather then below it! This is the motor that sheefreak ended up with. both of yall bitches need to stop lying i never said cylinder wasn't scratched i told the shit was scratched from the get go... i said the motor was running and running fine when i took it apart.. Quote Link to comment Share on other sites More sharing options...
Guest utleybanshee Posted February 21, 2009 Report Share Posted February 21, 2009 DO THE CYLINDERS NEED WELDING AND ARE THE PISTONS TRASHED OR IS THE SPROCKET NUT WELDED TO THE OUTPUT SHAFT LIKE THE LAST TWO MOTORS YOU HAVE SOLD?? umm lets see the fucking cylinders were posted with many pics showing that they had an imperfrection... so once again...; if a person didn't want them they shouldn't have bought them.. Quote Link to comment Share on other sites More sharing options...
Guest utleybanshee Posted February 21, 2009 Report Share Posted February 21, 2009 Getting rid of the 10mil crank? naw using it for another build.. Quote Link to comment Share on other sites More sharing options...
dizzzzle01 Posted February 21, 2009 Report Share Posted February 21, 2009 wtf yea u gone get that fucking lockout and...nm.. The words u see above r pure $hit and could only b spoken by someone whos full to the brim! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.