Ieat4strokes Posted February 19, 2009 Report Share Posted February 19, 2009 if i could snatch these for a decent price with pistons, head n rings included what would ya say? are these decent? neone else running them? Quote Link to comment Share on other sites More sharing options...
Ieat4strokes Posted February 19, 2009 Author Report Share Posted February 19, 2009 ttt Quote Link to comment Share on other sites More sharing options...
locogato11283 Posted February 19, 2009 Report Share Posted February 19, 2009 whats a decent price?? i personally would stay away from vitos, but depending on how cheap you could get it, it might be worth it. Quote Link to comment Share on other sites More sharing options...
1996dragshee Posted February 19, 2009 Report Share Posted February 19, 2009 I run a set right now with my 4 mill.for the price i got my set up at i couldn't pass it up.i parted my stock cylinder drag port cylinders and coolhead and bought the whole drag ported top end with the blaster pistons But i like em,strokg running cylinder imo Quote Link to comment Share on other sites More sharing options...
alcoholbanshee Posted February 19, 2009 Report Share Posted February 19, 2009 I run a set right now with my 4 mill.for the price i got my set up at i couldn't pass it up.i parted my stock cylinder drag port cylinders and coolhead and bought the whole drag ported top end with the blaster pistons But i like em,strokg running cylinder imo Yup...I have made a couple passes on 1996dragshee's bike......strong running for sure!! If they can be had for a descent price, I would buy them!! Quote Link to comment Share on other sites More sharing options...
Ieat4strokes Posted February 19, 2009 Author Report Share Posted February 19, 2009 well he wants 500 for the whole top end, head, pistons, rings and cylinders. is this a decent price? also besides carbs and pipes what am i looking at to install? he said i dont have to modify cases for the 68mm......true? thanks guys just trying to keep from making a newb mistake. Quote Link to comment Share on other sites More sharing options...
Ieat4strokes Posted February 19, 2009 Author Report Share Posted February 19, 2009 do i have to modify cases? also how many bores u get on a 68mm sleeve? help a brutha out i need to let him kno something. Quote Link to comment Share on other sites More sharing options...
alcoholbanshee Posted February 19, 2009 Report Share Posted February 19, 2009 do i have to modify cases? also how many bores u get on a 68mm sleeve? help a brutha out i need to let him kno something. No you dont have to modify the cases..................I am not sure how many bores, you may want to call Vitos, they have always been helpful to me................... 1 888 350 8486. Hope this helps!!!!!!!!!!!!!! Quote Link to comment Share on other sites More sharing options...
1996dragshee Posted February 26, 2009 Report Share Posted February 26, 2009 My cylinders are currently on a 70mm bore.I'm not sure of how many bores can be done but mine seem to still have a lot of sleeve wall left Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.