Jump to content

This 'shee has 68mm carbs! Awesome quad


SLORYDER

Recommended Posts

http://cgi.ebay.com/ebaymotors/2006-Custom...101598QQptZATVs

 

IMG_4547.JPG

Here is a killer 2006 custom built Yamaha Banshee drag racing quad. It was built with the best of everything and cost over $22K to build. It features a custom made chrome molly frame at a cost of $5K. The motor is a Banshee 525cc big bore that cost $9k to build. With a 7 millimeter crank, 68 millimeter Cheetah Cub cylinder, V-Force reeds valve system, 68 millimeter carbs and Cool heads. It has 1 through 5 speed trans with overdrive and a Alky lock-up clutch. The Fuel mix is 31 to 1 alcohal!

 

This quad is one bad ass ride and looks killer with its full custom paint job. It even has a full wheelie bar. It is sold on a bill of sale. If you have any additional questions please Call Joe at 602-418-1736 with any inquires about this beauty an it is located in sunny Paradise Valley, AZ!

 

Good luck in the bidding

Edited by SLORYDER
Link to comment
Share on other sites

http://cgi.ebay.com/ebaymotors/2006-Custom...101598QQptZATVs

 

IMG_4547.JPG

Here is a killer 2006 custom built Yamaha Banshee drag racing quad. It was built with the best of everything and cost over $22K to build. It features a custom made chrome molly frame at a cost of $5K. The motor is a Banshee 525cc big bore that cost $9k to build. With a 7 millimeter crank, 68 millimeter Cheetah Cub cylinder, V-Force reeds valve system, 68 millimeter carbs and Cool heads. It has 1 through 5 speed trans with overdrive and a Alky lock-up clutch. The Fuel mix is 31 to 1 alcohal!

 

This quad is one bad ass ride and looks killer with its full custom paint job. It even has a full wheelie bar. It is sold on a bill of sale. If you have any additional questions please Call Joe at 602-418-1736 with any inquires about this beauty an it is located in sunny Paradise Valley, AZ!

 

Good luck in the bidding

 

 

7mil crank and 68 bore does not equal 525cc either.................And if it cost 9 grand to build the engine...he got robbed!!!!!!!!!!! 31 to 1 alcohol mix....he sure does go the extra mile.....hell most are good at 32:1..LMAO!!!

Link to comment
Share on other sites

It says if there is any discrepancies between the listing and the actual bike, they will work out a compromise, or fix it...

 

 

Bid $10,000.00 on it, then after you win, bitch there's no 68mm carbs, and no alky lock up... Then if those rare items would cost around $7,000.00 themselves, you just got a piece of shit drag bike for an easy $3,000.00 :whistling:

Link to comment
Share on other sites

http://cgi.ebay.com/ebaymotors/2006-Custom...101598QQptZATVs

 

IMG_4547.JPG

Here is a killer 2006 custom built Yamaha Banshee drag racing quad. It was built with the best of everything and cost over $22K to build. It features a custom made chrome molly frame at a cost of $5K. The motor is a Banshee 525cc big bore that cost $9k to build. With a 7 millimeter crank, 68 millimeter Cheetah Cub cylinder, V-Force reeds valve system, 68 millimeter carbs and Cool heads. It has 1 through 5 speed trans with overdrive and a Alky lock-up clutch. The Fuel mix is 31 to 1 alcohal!

 

This quad is one bad ass ride and looks killer with its full custom paint job. It even has a full wheelie bar. It is sold on a bill of sale. If you have any additional questions please Call Joe at 602-418-1736 with any inquires about this beauty an it is located in sunny Paradise Valley, AZ!

 

Good luck in the bidding

alot of doe went into that ride

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...