blue-banshee Posted February 9, 2009 Report Share Posted February 9, 2009 i was trying to figure out with float bowl go's on witch carb, i have the one with the brass looking tube on the left side(choke side) i think i might have them mixed does anyone now witch one goes on what side, i also noticed last time i took them apart the one says 1-2 and the other says 2-2 any help would be great Quote Link to comment Share on other sites More sharing options...
blue-banshee Posted February 9, 2009 Author Report Share Posted February 9, 2009 Anyone? Quote Link to comment Share on other sites More sharing options...
BumpaD_Z28 Posted February 9, 2009 Report Share Posted February 9, 2009 Huh, I just had mine apart today and as far as I can tell they are identical ... the "vent tubes" come out on the same side, both bowls, on mine ! ~DaVe Quote Link to comment Share on other sites More sharing options...
blue-banshee Posted February 9, 2009 Author Report Share Posted February 9, 2009 hummm mine are stock are urs? Quote Link to comment Share on other sites More sharing options...
harbinger of death Posted February 9, 2009 Report Share Posted February 9, 2009 the bowl with the brass tube goes on the left carb. its what feeds the choke Quote Link to comment Share on other sites More sharing options...
BumpaD_Z28 Posted February 9, 2009 Report Share Posted February 9, 2009 hummm mine are stock are urs? Yea they are stock ... and mine have tubes in both bowls ... ~DaVe Quote Link to comment Share on other sites More sharing options...
harbinger of death Posted February 9, 2009 Report Share Posted February 9, 2009 Yea they are stock ... and mine have tubes in both bowls ... ~DaVe your right bowl shouldnt have the tube in it, but it wont hurt anything. do you have another set of carbs that the bowls might have gotten mixed up or did you buy it like that? all the tube does is feed the choke, so its useless in the right carb. Quote Link to comment Share on other sites More sharing options...
blue-banshee Posted February 9, 2009 Author Report Share Posted February 9, 2009 now i'm really confused, i just took mine off i guess i have the tubes on both i thought they where spost to left and right i guess not? Quote Link to comment Share on other sites More sharing options...
BumpaD_Z28 Posted February 9, 2009 Report Share Posted February 9, 2009 your right bowl shouldnt have the tube in it, but it wont hurt anything. do you have another set of carbs that the bowls might have gotten mixed up or did you buy it like that? all the tube does is feed the choke, so its useless in the right carb. I bought it like that ... on this exploded diagram it calls both sides out as the same part # ??? ??? ??? ~DaVe Quote Link to comment Share on other sites More sharing options...
shee4speed Posted February 9, 2009 Report Share Posted February 9, 2009 stock carbs usually only have the tube on one side.at least mine did. I wonder what carbs you are running to have the tube on both sides. Quote Link to comment Share on other sites More sharing options...
Klaus Posted February 9, 2009 Report Share Posted February 9, 2009 Hey guys, This is how it works. You see those holes on the float bowl ( a big one and a smaller one ). Take a torch and chech the big hole, one of the two float bowls will (should ) have a jet in it ( looks like a pilot jet ), that float bowl goes on the carb with the choke ( that carb has a brass tube going into the float bowl which the other carb doesnt). It's hard for me to explain, let me know if I need to clarify anything. p.s my carbs also have pipes in both float bowls, bot only one on the carb itself. Arnt you perhaps confused? Good luck!! Quote Link to comment Share on other sites More sharing options...
blue-banshee Posted February 9, 2009 Author Report Share Posted February 9, 2009 ok let me get this stright, so the one with the jet, go's on the choke side carb? whats in the tube for right (non choke side) carb just nothing? and the numbers 1-2, 2-2 wont tell you witch one has the jet or not? Quote Link to comment Share on other sites More sharing options...
Klaus Posted February 9, 2009 Report Share Posted February 9, 2009 Yes, one with the jet goes on the choke side, the tube for the non choke side is just blank, no jet, nothing. I think it's blocked off in the float bowl, if you compare it to the other one. As for the nrs, im not sure. It will probly work, you will just have to find out which cylinder is nr 1. Quote Link to comment Share on other sites More sharing options...
blue-banshee Posted February 9, 2009 Author Report Share Posted February 9, 2009 Ok thanks for clearing that up Im gonna take alook at it tonight Quote Link to comment Share on other sites More sharing options...
05.Banshee.SE Posted February 9, 2009 Report Share Posted February 9, 2009 I have a 2005 bike and have them in both bowls... Maybe they did this so people wouldn't put the wrong bowls on the wrong carbs after a certain year? I never knew there was ones even without it....................mine are stock too. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.