joee20002 Posted February 1, 2009 Report Share Posted February 1, 2009 so now that i am going to run alky do i need to run a cross over in my intake like the built in one in the boss intakes? or can i just get a intake with out a cross over? Quote Link to comment Share on other sites More sharing options...
NYUK Posted February 1, 2009 Report Share Posted February 1, 2009 no cross over is needed. Quote Link to comment Share on other sites More sharing options...
dajogejr Posted February 1, 2009 Report Share Posted February 1, 2009 I run the large BOSS intakes with no crossover. They actually move the carbs closer to the motor vs. thicker, crossover built in intakes I had prior...which I like. Quote Link to comment Share on other sites More sharing options...
joee20002 Posted February 1, 2009 Author Report Share Posted February 1, 2009 so with moving closer to the motor will i need to use reed spacers so that i clear the clutch cable? Quote Link to comment Share on other sites More sharing options...
dajogejr Posted February 1, 2009 Report Share Posted February 1, 2009 sorry Joe... For some reason I thought you were going cub with bigger carbs...didn't realize you were running OEM cylinders and 35PWKs. You can grind down the float bowl drain screw, you can bend the clutch arm down ( you can do a combo of these two) or you can buy the intakes with the crossover built in to space it away... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.