biscuit75 Posted January 29, 2009 Report Share Posted January 29, 2009 i jst put a new head on my banshee and it doesnt have a place to put the line coming from the radiator on it. what am i supposed to do with it? its the small line that comes from the top of the radiator Quote Link to comment Share on other sites More sharing options...
vulvafan537240 Posted January 29, 2009 Report Share Posted January 29, 2009 huh? are you talkin about the overflow tube? it goes to the overflow tank. Quote Link to comment Share on other sites More sharing options...
biscuit75 Posted January 30, 2009 Author Report Share Posted January 30, 2009 huh? are you talkin about the overflow tube? it goes to the overflow tank. no theres 2 tubes coming out of the top of the radiator 1 goes to the overflow bottle and the other goes into the top of the head its only like 1/4 inch or so Quote Link to comment Share on other sites More sharing options...
jbooker82 Posted January 30, 2009 Report Share Posted January 30, 2009 That is wierd what kind of head is it? There needs to be that small line so air will not become traped in the head. Quote Link to comment Share on other sites More sharing options...
biscuit75 Posted January 30, 2009 Author Report Share Posted January 30, 2009 its a pro design head on a pro x clynder Quote Link to comment Share on other sites More sharing options...
jbooker82 Posted January 30, 2009 Report Share Posted January 30, 2009 does it have a place where it looks like one shoudl be there? If you cant find a place then I would drill, tap and thread in a fitting. That way there would still be one. josh Quote Link to comment Share on other sites More sharing options...
2001Stroker Posted January 30, 2009 Report Share Posted January 30, 2009 Are you talking about the hose that's for purging the air out of the head? Usually located on top of the head, at the highest point? If so, does it have a bleeder valve on the head, instead of the hose? If it doesn't have either of the two, you need to drill a hole at the highest point of the head, and put either a bleeder valve there, or put a fitting there and run a hose to the top of the radiator. If it goes to the top of the radiator, it has to be at the very top, where their is no coolant. Some people think that you can hook that line in the middle of the radiator, but that could force the air to stay trapped in that hose or in the head. Quote Link to comment Share on other sites More sharing options...
biscuit75 Posted January 31, 2009 Author Report Share Posted January 31, 2009 i dnt see any kind of bleeder valve or anything im gna take it off and take it to the shop and put a pipe tap in it thanks for the advice Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.