250Rho Posted January 22, 2009 Report Share Posted January 22, 2009 would have been nice for the ass hole who sold me my bike to tell me that it was bored out. after a year of riding its time to get a fresh top end, no big deal right.... wrong i ordered all the parts and when i pull the top end i find that my new pistons are too fucking small. now im out of money because of all the parts i already had to buy. :verymad: now i have to wait untill i start working this summer to buy the right parts :: ........im mad i think somebodys gettin an ass kickin :ninja: Quote Link to comment Share on other sites More sharing options...
05.Banshee.SE Posted January 23, 2009 Report Share Posted January 23, 2009 Honestly, you probably should have pulled it apart and looked at it first anyways before you ordered shit. Not saying that that asshole who sold you it doesn't matter, he's just that...an asshole. It sucks that pullin off the head and measuring this shit coulda fixed your problems. Quote Link to comment Share on other sites More sharing options...
lowbuckracing Posted January 23, 2009 Report Share Posted January 23, 2009 Post on ebay and take a small loss.... Quote Link to comment Share on other sites More sharing options...
RUDEDAWG Posted January 23, 2009 Report Share Posted January 23, 2009 Honestly, you probably should have pulled it apart and looked at it first anyways before you ordered shit. Not saying that that asshole who sold you it doesn't matter, he's just that...an asshole. It sucks that pullin off the head and measuring this shit coulda fixed your problems. Yup! :thumbsup: Quote Link to comment Share on other sites More sharing options...
dajogejr Posted January 23, 2009 Report Share Posted January 23, 2009 Um...you got all those bikes in your sig and you still ordered parts before tearing it down? And you've rode it for a year? Sorry dude...your fault on that one... Quote Link to comment Share on other sites More sharing options...
dragbanshee Posted January 23, 2009 Report Share Posted January 23, 2009 COMMON SENSE!!! Quote Link to comment Share on other sites More sharing options...
woodro77 Posted January 23, 2009 Report Share Posted January 23, 2009 never buy the pistons before pulling it apart , even if you got the bore size what would you do if 1 of the cylinders is scared up and needs a bore job , even if the guy told me it was the stock bore i would have pulled it apart first . Quote Link to comment Share on other sites More sharing options...
bbcmudtruck Posted January 23, 2009 Report Share Posted January 23, 2009 Don't take it to hard man. I have learned shit the hard way myself. I'm sure some of these guys have to. Post up the piston kit you bought in the for sale section and on ebay and try get your money back. Hell even offer them up for trade towards something else you need. Quote Link to comment Share on other sites More sharing options...
05.Banshee.SE Posted January 23, 2009 Report Share Posted January 23, 2009 Hell yeah. I know someone on here could probably use it. I even might be able to, depending on what ya got. But you probably don't run a 4 mil longrod. Quote Link to comment Share on other sites More sharing options...
250Rho Posted January 26, 2009 Author Report Share Posted January 26, 2009 yeah i see how i can look really stupid :shoothead: now i know to measure then buy. problem is i bought all the parts seperatly from diferent sources to save some dough. im puten em on ebay as a set see if im not totally screwd.,, :shrug: ,,it was just starting to lose compresion and it sounded good so i thought id get all the parts together and do it all in one sitting and be fairly rutine... guess not :shrug: . think i might have it ported while its apart though. who do you guys reccomend? Quote Link to comment Share on other sites More sharing options...
dragbanshee Posted January 26, 2009 Report Share Posted January 26, 2009 yeah i see how i can look really stupid :shoothead: now i know to measure then buy. problem is i bought all the parts seperatly from diferent sources to save some dough. im puten em on ebay as a set see if im not totally screwd.,, :shrug: ,,it was just starting to lose compresion and it sounded good so i thought id get all the parts together and do it all in one sitting and be fairly rutine... guess not :shrug: . think i might have it ported while its apart though. who do you guys reccomend? You sure wouldnt regret it. Quote Link to comment Share on other sites More sharing options...
dajogejr Posted January 26, 2009 Report Share Posted January 26, 2009 yeah i see how i can look really stupid :shoothead: now i know to measure then buy. problem is i bought all the parts seperatly from diferent sources to save some dough. im puten em on ebay as a set see if im not totally screwd.,, :shrug: ,,it was just starting to lose compresion and it sounded good so i thought id get all the parts together and do it all in one sitting and be fairly rutine... guess not :shrug: . think i might have it ported while its apart though. who do you guys reccomend? Why don't you contact the place you bought the pistons and see if they'll exchange them. Offer to pay a 10% restocking fee....you'd probably lose more than that on Ebay.... Quote Link to comment Share on other sites More sharing options...
Dinner Posted January 27, 2009 Report Share Posted January 27, 2009 Why don't you contact the place you bought the pistons and see if they'll exchange them.Offer to pay a 10% restocking fee....you'd probably lose more than that on Ebay.... The man brings up a good point. The business should let you return them, especially being as they are new and have not been used. Call them up, tell your story and see what they say! Quote Link to comment Share on other sites More sharing options...
FASTOYS Posted January 27, 2009 Report Share Posted January 27, 2009 I would of gladly swapped you out if you had bought them from us. As mentioned might try to call who you bought them from. Like in my sig says: "You can go broke saving money". We all learn the hard way sometimes. Quote Link to comment Share on other sites More sharing options...
250Rho Posted January 28, 2009 Author Report Share Posted January 28, 2009 i just got my new set of wiseco's :biggrin: im feelin pretty bad ass now you better look out :laugh: old stuff will be on ebay shortly i aint never gettin stock stuff again wiesco's seem to just bleed quality :thumbsup: Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.