ridin420 Posted January 18, 2009 Report Share Posted January 18, 2009 Hey everyone I have a 04 banshee stock other than v force reeds toomy t-6 and k&n in box filter the motor is low on compresson still runs so i want to rebuild before it blows. i was thinking about welded crank wiesco pistons and the +4 timing plate and mabey a cool head so i guess was just wondering what brands people would recomend and what u have ran on ur bike thanks alot :cool: Quote Link to comment Share on other sites More sharing options...
vulvafan537240 Posted January 18, 2009 Report Share Posted January 18, 2009 if it has low compression you shouldnt need a new crank. the chariot adjustable stator plate on ebay is a good deal. 50 bucks and its billet. get a noss head also. noss is a site sponsor and uses stock studs. :thumbsup: Quote Link to comment Share on other sites More sharing options...
blaster2006 Posted January 18, 2009 Report Share Posted January 18, 2009 good luck on the rebuild.. btw whats your compression on the cylinders? Quote Link to comment Share on other sites More sharing options...
ridin420 Posted January 18, 2009 Author Report Share Posted January 18, 2009 good luck on the rebuild.. btw whats your compression on the cylinders? i am at 500ft it is -15 out here in canada has 90 psi on one side and 60 on the other Quote Link to comment Share on other sites More sharing options...
lowbuckracing Posted January 18, 2009 Report Share Posted January 18, 2009 What kind of ridding do you usually do? :yes: Quote Link to comment Share on other sites More sharing options...
bansheefreak Posted January 18, 2009 Report Share Posted January 18, 2009 i am at 500ft it is -15 out here in canada has 90 psi on one side and 60 on the other ohh yeah it time for a rebiuld.. if they was both 90lb wouldnt be too bad but the one at 90 and one at 60lb is not good... get it bored out new wiseco pistons,timing plate,nos head with 20 or 21cc domes.. Quote Link to comment Share on other sites More sharing options...
ridin420 Posted January 18, 2009 Author Report Share Posted January 18, 2009 What kind of ridding do you usually do? :yes: mostly trail riding Quote Link to comment Share on other sites More sharing options...
ridin420 Posted January 18, 2009 Author Report Share Posted January 18, 2009 ohh yeah it time for a rebiuld.. if they was both 90lb wouldnt be too bad but the one at 90 and one at 60lb is not good... get it bored out new wiseco pistons,timing plate,nos head with 20 or 21cc domes.. [/quote thanks for the info how much compression should it have with the 21cc domes Quote Link to comment Share on other sites More sharing options...
bansheefreak Posted January 18, 2009 Report Share Posted January 18, 2009 find out what sea level is.. and go here noss Quote Link to comment Share on other sites More sharing options...
jbooker82 Posted January 18, 2009 Report Share Posted January 18, 2009 Get the cylinders ported. There is no better time since your rebuilding it. After pipes a port job is the next big increase in power. If it was my choice between a port job, and a cool head, I would do the port job. You can always slap a head on later. Quote Link to comment Share on other sites More sharing options...
JEFF C Posted January 20, 2009 Report Share Posted January 20, 2009 where about in Canada are you Get the cylinders ported. There is no better time since your rebuilding it. After pipes a port job is the next big increase in power. If it was my choice between a port job, and a cool head, I would do the port job. You can always slap a head on later. Quote Link to comment Share on other sites More sharing options...
ridin420 Posted January 20, 2009 Author Report Share Posted January 20, 2009 where about in Canada are you near ottawa ontario Quote Link to comment Share on other sites More sharing options...
kbone77 Posted January 20, 2009 Report Share Posted January 20, 2009 next steps I'd recommend would be- mild port and if you're on a budget mill the head. if you like the bling and may want to play w/ different compressions-get the cool head. Quote Link to comment Share on other sites More sharing options...
JEFF C Posted January 20, 2009 Report Share Posted January 20, 2009 iam just out side London,Ontario.Nice to know that there is a least one more shee owner in ont thanks jeff PS ite have my shee for sale,if you know anybody looking near ottawa ontario Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.