sheerider1026 Posted January 10, 2009 Report Share Posted January 10, 2009 got the bike together and installed it.. i am using the direct drive lockout.. while idling and low rpms i am hearing a slight chatter noise from under the clutch cover.. is this noise from the fingers on the lockout spinning around and tapping the clutch pressure plate?? do you guys with lockouts ever notice this? Quote Link to comment Share on other sites More sharing options...
sheerider1026 Posted January 10, 2009 Author Report Share Posted January 10, 2009 bump Quote Link to comment Share on other sites More sharing options...
AKheathen Posted January 10, 2009 Report Share Posted January 10, 2009 bump i don't have a lockup , but i would expect the weights to make niose @ idle, given the gearing between the clutch and crank. with all the lockouts runnin out there, i would've expected someone else to reply by now :shrug: Quote Link to comment Share on other sites More sharing options...
jbooker82 Posted January 11, 2009 Report Share Posted January 11, 2009 I cant say for sure. Mine makes a noise at idle but I cant remember if it did befoe the lock up or not. I just write it off as general banshee noise. Quote Link to comment Share on other sites More sharing options...
AKheathen Posted January 11, 2009 Report Share Posted January 11, 2009 I cant say for sure. Mine makes a noise at idle but I cant remember if it did befoe the lock up or not. I just write it off as general banshee noise. no noise here, unless one cyliner mises at idle, but i adjust the carbs to fix Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.