Jump to content

Banshee clutch cable lever Help!


qcklys

Recommended Posts

Hey, my clutch lever (the one inside the casing) is broken, i need to replace it but have no idea how to remove the old one! is there something special i need to do to pull it out?! thanks for the help :)

i don't have experience in replacing the lever, so i don't know if you have to do anything else, but i belive you have to pull the pressure plate and pushrod back, remove the retainer that goe over the top, and pull up. but you could possibly just back the clutch adjuster off a bit, pull the top retainer, an lift it out if you can get a hold of it. :shrug:

Link to comment
Share on other sites

i don't have experience in replacing the lever, so i don't know if you have to do anything else, but i belive you have to pull the pressure plate and pushrod back, remove the retainer that goe over the top, and pull up. but you could possibly just back the clutch adjuster off a bit, pull the top retainer, an lift it out if you can get a hold of it. :shrug:

 

^ yes. however what exactally do you mean by broken? Where the cable goes? Or do you mean it doesnt operate the clutch anymore? If so you should check the pushrod and ball to see if everything is ok. They could have welded themselves together.

Link to comment
Share on other sites

Are you talking about this : http://www.farmandsandtoys.com/partdetail.asp?partid=202

 

If so you will have to remover your clutch cover and outer clutch hub.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...