shogs Posted January 1, 2009 Report Share Posted January 1, 2009 I'm very close to ordering a new top end and had a few questions. I was wondering if you guys were me would you bore your cylinders or just check them out and rebuild with stock bore? I hear sometimes boring makes the reliability a little bit worse. Also is this kit (link at bottom) all i'm going to need for a top end and is it a reasonable price? I've never done a top end before and wanna just jump in to it. Someone offered to help as well so it makes me want it even more. Also while I am talking about my top end I have a question about my right cylinder. When I started it today hot air and a little bit of smoke blew out my right pipe and only room temperature smoke out of my left pipe. Could this be my reeds or is it most likely a piston problem? Thanks for the help in advance. http://cgi.ebay.com/ebaymotors/Wiseco-Pist...sQ5fAccessories Quote Link to comment Share on other sites More sharing options...
98_banshee_newbie Posted January 1, 2009 Report Share Posted January 1, 2009 I would just bore them out and continue on my way Quote Link to comment Share on other sites More sharing options...
FASTOYS Posted January 1, 2009 Report Share Posted January 1, 2009 Not sure why you want to spend more money as we have the Holliday special going on for only 155 in our sig. Need to have your cyls. looked at to see if they need bored or not. Sounds like your carbs may need synced. Quote Link to comment Share on other sites More sharing options...
shogs Posted January 1, 2009 Author Report Share Posted January 1, 2009 Not sure why you want to spend more money as we have the Holliday special going on for only 155 in our sig. Need to have your cyls. looked at to see if they need bored or not. Sounds like your carbs may need synced. I'm running a 2into1 so that isn't the problem and the carbs were synced before I took them off. I think its a problem with a gasket or seal thats broken. Is the top end special that you guys have everything i'll need? And how soon can you ship it!? :biggrin: Quote Link to comment Share on other sites More sharing options...
FASTOYS Posted January 1, 2009 Report Share Posted January 1, 2009 I'm running a 2into1 so that isn't the problem and the carbs were synced before I took them off. I think its a problem with a gasket or seal thats broken. Is the top end special that you guys have everything i'll need? And how soon can you ship it!? :biggrin: Should be . Tomorrow soon enough? Quote Link to comment Share on other sites More sharing options...
88bansheebitch Posted January 1, 2009 Report Share Posted January 1, 2009 Should be . Tomorrow soon enough? word...Jeffs an awesome guy to deal with Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.