Jump to content

Need some help


alexmarq1986

Recommended Posts

So I was cleaning my fmf fatties and the silencers and I took them off and when I was tightening them back up the rubber clamp that connects the fatties To the stinger(silencer right?) is ripped thru the middle, were would I buy one of these rubber clamps or can I use an alternative hose? Also I think were the fatties connects to the engine it is loose and do exhaust fumes leak thru there? And what would I need to do to fix this?

Link to comment
Share on other sites

That's kind of steep for me, I just want either the stock one or do you guys think I can use some kind of hose like heater hose? and also I will check the springs to see if they are tight.

 

a friend of mine used some type of hose and when his pipes got hot, the hose caught on fire. luckily no major damage was done, but i wouldnt do it.

Link to comment
Share on other sites

dealer sells them. one is like 12 and the other is like 22. get the rear exhaust coupler. i tried plumbing coupler, and it melted, cus i couldn't find it in rubber. it looks like heater hose (1" i.d.) but it's higer heat, and woven all the way through. the rubber just helps it flex and seal. i just broke down and ordered it red label with my intake, cus i tore that too the same time i melted that synthetic thing. had to wrap and clamp a chicken selects box to get back to my truck. wish i could have took a pick before it smoldered off. my friend said all he could smell is ranch. beat that for scented exhaust! :yelrotflmao:

Link to comment
Share on other sites

Also I think were the fatties connects to the engine it is loose and do exhaust fumes leak thru there? And what would I need to do to fix this?

Your pipe o-rings could possibly be worn/bad, also. Rockymountainatv sells an FMF kit for the Fatty's with springs and o-rings for $9.99.

Link to comment
Share on other sites

dealer sells them. one is like 12 and the other is like 22. get the rear exhaust coupler. i tried plumbing coupler, and it melted, cus i couldn't find it in rubber. it looks like heater hose (1" i.d.) but it's higer heat, and woven all the way through. the rubber just helps it flex and seal. i just broke down and ordered it red label with my intake, cus i tore that too the same time i melted that synthetic thing. had to wrap and clamp a chicken selects box to get back to my truck. wish i could have took a pick before it smoldered off. my friend said all he could smell is ranch. beat that for scented exhaust! :yelrotflmao:

 

 

there you go. and you can get it off the dollar menu. thats the cheapest fix youll find. :laugh:

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...