05.Banshee.SE Posted December 7, 2008 Report Share Posted December 7, 2008 Finished the head, domes, and timing install... what do you think? Sound alright? (Not bragging, asking if you can hear if anything is wrong lol...) Seemed to run alright.. to be honest I'm kinda dissapointed. I think it's because I did like 4 things at once from stock, which all added to top end [which spoiled me], and then this filled the gap and picked up my midrange. EDIT - I think I need carbs bad too, that's probably a part of the reason why. Quote Link to comment Share on other sites More sharing options...
Michael Jackson Posted December 7, 2008 Report Share Posted December 7, 2008 your motor seems to moving alot Quote Link to comment Share on other sites More sharing options...
THE GRIM RIPPER Posted December 7, 2008 Report Share Posted December 7, 2008 Man... It sure looks like you have a motor mount not bolted up somewhere Quote Link to comment Share on other sites More sharing options...
2001Stroker Posted December 7, 2008 Report Share Posted December 7, 2008 I was thinking the same thing. Sure is jumping around alot. That thing should be bolted in there tight. What is the timing set at, and what size domes? Quote Link to comment Share on other sites More sharing options...
jbooker82 Posted December 7, 2008 Report Share Posted December 7, 2008 I would say you have a loose motor mount. Guess it is time for a Port job if you want more top end. It is the next bigest step after pipes. Quote Link to comment Share on other sites More sharing options...
BansheeRider87 Posted December 7, 2008 Report Share Posted December 7, 2008 your motors about to jump out! Quote Link to comment Share on other sites More sharing options...
05.Banshee.SE Posted December 7, 2008 Author Report Share Posted December 7, 2008 Lol, I noticed that too. I thought Shit, there's no way it gained that much power, haha. I didn't do anything with the motor mounts or nothin, so I'll have to look at those. Timing is +4, Pro Design 21cc domes. Quote Link to comment Share on other sites More sharing options...
papa_smurf49319 Posted December 7, 2008 Report Share Posted December 7, 2008 not to beat a dead horse but i was thinking you deffinetly have a motor mount loose like the others said, otherwise sounds real good! Quote Link to comment Share on other sites More sharing options...
bbcmudtruck Posted December 7, 2008 Report Share Posted December 7, 2008 You would notice some more low end hit with some lower cc domes and some race gas. Quote Link to comment Share on other sites More sharing options...
AKheathen Posted December 8, 2008 Report Share Posted December 8, 2008 sounds unballanced, like you need to sync your carbs. maybe a bit lean on the pilots too. Quote Link to comment Share on other sites More sharing options...
mopar1rules Posted December 8, 2008 Report Share Posted December 8, 2008 05.Banshee.SE, you said that you picked up top end w/+4 timing? i gained bottom to mid w/that on mine, but top end went flat, w/no over rev what so ever. i wonder what gives. Quote Link to comment Share on other sites More sharing options...
Big_Dave Posted December 8, 2008 Report Share Posted December 8, 2008 it seems like it may only be mounted by the tension rods. but im not sure Quote Link to comment Share on other sites More sharing options...
Snopczynski Posted December 8, 2008 Report Share Posted December 8, 2008 Sounds like every other banshee with a set of pipes. Quote Link to comment Share on other sites More sharing options...
05.Banshee.SE Posted December 8, 2008 Author Report Share Posted December 8, 2008 I didn't gain any top end. In fact, I felt like I lost top end...but now I have solid power. I kinda had a flat spot...power peaked when it hit pipe, flat spot, then power again at top end....now it's on pipe and UNTIL top end. Yes +4. I'm a noob to detonation and I thought I heard it...but shit could have been all the damn ratteling! LOL Quote Link to comment Share on other sites More sharing options...
dragbanshee Posted December 8, 2008 Report Share Posted December 8, 2008 I didn't gain any top end. In fact, I felt like I lost top end...but now I have solid power. I kinda had a flat spot...power peaked when it hit pipe, flat spot, then power again at top end....now it's on pipe and UNTIL top end. Yes +4. I'm a noob to detonation and I thought I heard it...but shit could have been all the damn ratteling! LOL Sounds ok but hard to tell from where im sittin, what size domes did you go with? May need a little more OCT. boost. :biggrin: Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.