lsr_banshee Posted November 24, 2008 Report Share Posted November 24, 2008 hey guys new member here so bare with my first post, does anyone have pics of how they mounted their pvl ignition and also do I need to do anything special to hook up a pro design tether to it? thanks any help is appreciated Quote Link to comment Share on other sites More sharing options...
wesw Posted November 24, 2008 Report Share Posted November 24, 2008 there are holes where stock coil was you can mount one there, i think that was the right side, and theres a spot on the left side, i think i drilled it out to make room for a bolt to go thru. i made sure there was a good ground on both coils, you will need to wire 2 kill switchs or as you want 2 tether switches i think or wire them to kill both coils. what are you going to set your timing at in MM?? Quote Link to comment Share on other sites More sharing options...
lsr_banshee Posted November 24, 2008 Author Report Share Posted November 24, 2008 there are holes where stock coil was you can mount one there, i think that was the right side, and theres a spot on the left side, i think i drilled it out to make room for a bolt to go thru. i made sure there was a good ground on both coils, you will need to wire 2 kill switchs or as you want 2 tether switches i think or wire them to kill both coils. what are you going to set your timing at in MM?? not sure where to set timing, any ideas? Quote Link to comment Share on other sites More sharing options...
wesw Posted November 24, 2008 Report Share Posted November 24, 2008 was told 1.85mm before tdc was +7 degrees. all depends on what your going to do and what fuel your domes blah blah talk to you builder and go from there. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.