ATVridinMaNiAc Posted November 16, 2008 Report Share Posted November 16, 2008 just wandering about vitos, i always thought that they made pretty good performance parts but i dont see any of there parts in peoples sigs, and i dont think ive seen any1 using there Fast Bastard pipe, im just kinda suprised and wondering if there crap. Quote Link to comment Share on other sites More sharing options...
NYUK Posted November 16, 2008 Report Share Posted November 16, 2008 imo.JUNK! Quote Link to comment Share on other sites More sharing options...
98_shee Posted November 16, 2008 Report Share Posted November 16, 2008 imo.JUNK! I agree :thumbsup: Quote Link to comment Share on other sites More sharing options...
jtraptor660 Posted November 17, 2008 Report Share Posted November 17, 2008 I agree :thumbsup: the only thing from them that i have found to be decent is there HD clutch. other then that. stay away from them. i had one of there clutches on my desert raptor went through 9 races a year and 100+ miles a race for 3 years with out replacing. and sold the bike with that clutch in it. pipes and cylinders are just what nyuk says. JUNK Quote Link to comment Share on other sites More sharing options...
RUDEDAWG Posted November 17, 2008 Report Share Posted November 17, 2008 Their big bore triple exhaust cyls. look tempting. :ermm: Quote Link to comment Share on other sites More sharing options...
Michael Jackson Posted November 17, 2008 Report Share Posted November 17, 2008 best damn boost bottles this side of the mississippi Quote Link to comment Share on other sites More sharing options...
firebanshee Posted November 17, 2008 Report Share Posted November 17, 2008 My in frame pipes are fat bastards and i think they work good.I have out ran alot of cpi pipes with them,they are made by shearer but to vitos specs.I mainly like them because they are different and you dont see alot of them and i like to be different :geek: Quote Link to comment Share on other sites More sharing options...
dajogejr Posted November 17, 2008 Report Share Posted November 17, 2008 (edited) Their big bore triple exhaust cyls. look tempting. :ermm: Guy on PS ran them out of the box and said they were no different than mildly ported set of stockers... So in other words...they're not out of the box great cylinders, a la CP stuff. The difference in performance between CPI and Shearers is so miniscule... When you say you outran a CPI bike....that only means they had CPI pipes on it. Does that mean both bikes have all the exact same mods, same state of tune, same tires, gearing, rider weight...etc? I doubt pipes alone made the difference there. Ultimately, it's up to the builder... Sorry to get off topic... Edited November 17, 2008 by dajogejr Quote Link to comment Share on other sites More sharing options...
MikeNick Posted November 17, 2008 Report Share Posted November 17, 2008 Guy on PS ran them out of the box and said they were no different than mildly ported set of stockers...So in other words...they're not out of the box great cylinders, a la CP stuff. The difference in performance between CPI and Shearers is so miniscule... When you say you outran a CPI bike....that only means they had CPI pipes on it. Does that mean both bikes have all the exact same mods, same state of tune, same tires, gearing, rider weight...etc? I doubt pipes alone made the difference there. Ultimately, it's up to the builder... Sorry to get off topic... x2..I must agree with you about this my friend..haha..I have a Vitos impeller, 1st one the shaft was machined right so it would go into the case and I got another one in replacement of it from a guy off ebay who sells there products..I would stay away from them just because of the 1st thing I got that was theres was defective. Quote Link to comment Share on other sites More sharing options...
ThE_BaNsHeE_mAn88 Posted November 17, 2008 Report Share Posted November 17, 2008 i have a vitos crank in my bike and i have no problems with it at all. Derick Quote Link to comment Share on other sites More sharing options...
dajogejr Posted November 17, 2008 Report Share Posted November 17, 2008 I forgot all about them. They make a fine crank... Quote Link to comment Share on other sites More sharing options...
1996dragshee Posted November 17, 2008 Report Share Posted November 17, 2008 i run a monoblock set up..so far i love it Quote Link to comment Share on other sites More sharing options...
MikeNick Posted November 17, 2008 Report Share Posted November 17, 2008 x2..I must agree with you about this my friend..haha..I have a Vitos impeller, 1st one the shaft was machined right so it would go into the case and I got another one in replacement of it from a guy off ebay who sells there products..I would stay away from them just because of the 1st thing I got that was theres was defective. I ment to say the 1st one I got the shaft was not machined correctly and I had to send it back for a replacement..Sorry for my grammatical error Quote Link to comment Share on other sites More sharing options...
2001Stroker Posted November 17, 2008 Report Share Posted November 17, 2008 i run a monoblock set up..so far i love it I thought the only monoblocks that they sell are Cheetah Cubs. Quote Link to comment Share on other sites More sharing options...
1996dragshee Posted November 18, 2008 Report Share Posted November 18, 2008 I thought the only monoblocks that they sell are Cheetah Cubs. Nope, theres a vitos monoblock,t-rex,cheetah cub, and even fmf has a big bore monoblock powervalve cylinder...lol probably more too.. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.