wayfast1500 Posted October 31, 2008 Report Share Posted October 31, 2008 I was stripping down the shee to paint the frame and put new bushings and bearings in and I could not get that pivot bolt out if my life depended on it. Ive taken about 100 of these out on misc bikes before and never had a issue, I tried every trick in the book on this one and could only get it to budge about 1/8 of a inch. Anyone have any ideas? I tried soaking it with pb blaster, tapping it with a rubber mallet, putting the impact on it to get it to spin, impact and tap the end, 5lb mini sledge, 5lb sledge and impact, pneumatic hammer. I cant think of anything else, Im afraid to use heat. Quote Link to comment Share on other sites More sharing options...
bbcmudtruck Posted October 31, 2008 Report Share Posted October 31, 2008 BFH! Hit it like a man. Quote Link to comment Share on other sites More sharing options...
THE GRIM RIPPER Posted October 31, 2008 Report Share Posted October 31, 2008 Quote Link to comment Share on other sites More sharing options...
wayfast1500 Posted October 31, 2008 Author Report Share Posted October 31, 2008 I was afraid of mushrooming the end. I had the nut on it but still didnt want to crush threads and what not. I broke a drift inside the hole could hitting the drift in the hole caused that first inch to expand and keep it from comming out? It seems to be catching far before any area would have expanded tho so I dont think I could have expanded it? Quote Link to comment Share on other sites More sharing options...
THE GRIM RIPPER Posted October 31, 2008 Report Share Posted October 31, 2008 WTF is a drift?? You mean a punch? And no.... It sounds like its just seized up in there..... You got the idea, put the nut on and fuckin whale it. The bolt side does what when you hit it with the impact gun? Does it spin or not? Quote Link to comment Share on other sites More sharing options...
wayfast1500 Posted October 31, 2008 Author Report Share Posted October 31, 2008 right its a punch. It spins, I can even spin it with my finger it just will not come out. Quote Link to comment Share on other sites More sharing options...
klemet banshee Posted October 31, 2008 Report Share Posted October 31, 2008 your gonna gave to cut the bolt on each side of the swinger. same think happened to me theres no way ur getting out Quote Link to comment Share on other sites More sharing options...
wayfast1500 Posted October 31, 2008 Author Report Share Posted October 31, 2008 I figured thats what would happen I think im just going to run it as is, the bearings didnt feel worn so ill worry about it when they are. Quote Link to comment Share on other sites More sharing options...
peterlocal22 Posted October 31, 2008 Report Share Posted October 31, 2008 I figured thats what would happen I think im just going to run it as is, the bearings didnt feel worn so ill worry about it when they are. ya you might want to cut it. get it over with now and fixed while your stripping and painting the bike. This way you have time to get it taken care of while its a part. Quote Link to comment Share on other sites More sharing options...
Troubledsol Posted November 2, 2008 Report Share Posted November 2, 2008 Do NOT beat the crap out of it with a hammer I did that and it spread the hell out of my frame Just go get out the sawsall and cut it on either frame side between the frame and the swingarm be careful not to cut on the race because you will not cut through it I just did this Friday took forever to do it and this is how I ended up doing it after many hours of frustration Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.