grpark20 Posted October 18, 2008 Report Share Posted October 18, 2008 Well I finally moved up and need a good start for jetting for new set up. The old set up was jetted perfectly. Old set Up Stock Carbs with tors removed and idle screws installed 340 mains 27.5 pilots Airscrews 1 1/2 turn out Stock Needle on 3rd Clip Intake with crossover tube built in Stock bore jugs VF3's T-5's K&N Pods with outerwears Noss machine cool head with 20cc domes +4 timing advance sea level for elvation 60-70 riding temps New set up 33 PWK's mains? pilot? airscrews? needle type and position? 4 mil long rod crank 795 series pistons cut domes stock bore aggressive dune port to match 4 mil Intake with crossover tube built in VF3's T-5's +4 timing sea level for elevation 60-70 riding temps I need all the help I can get. Thanks in advance. Quote Link to comment Share on other sites More sharing options...
locogato11283 Posted October 18, 2008 Report Share Posted October 18, 2008 162 mains and 48 pilot. needle on the middle clip. that will be a good start. Quote Link to comment Share on other sites More sharing options...
dragbanshee Posted October 18, 2008 Report Share Posted October 18, 2008 Damn, your going to have a hell of a grin on your face when you come back from that 1st ride. good luck! Quote Link to comment Share on other sites More sharing options...
BellicoseBanshee Posted October 18, 2008 Report Share Posted October 18, 2008 What needle are you using? Quote Link to comment Share on other sites More sharing options...
grpark20 Posted October 18, 2008 Author Report Share Posted October 18, 2008 Damn, your going to have a hell of a grin on your face when you come back from that 1st ride. good luck! That's what I'm hoping...I literally man handled the old set up and figured I already had all the bolt ons, so it was time. :biggrin: Quote Link to comment Share on other sites More sharing options...
grpark20 Posted October 18, 2008 Author Report Share Posted October 18, 2008 What needle are you using? I don't have needles yet, or I'll have whatever comes standard.....thats why I need to know what to start with Quote Link to comment Share on other sites More sharing options...
grpark20 Posted October 19, 2008 Author Report Share Posted October 19, 2008 Anyone else have a similar set up? Quote Link to comment Share on other sites More sharing options...
AustinTX Posted October 21, 2008 Report Share Posted October 21, 2008 Anyone else have a similar set up? My setup is pretty close to yours. I run 160 mains, 42 pilots, and CEL needles with the clip in the middle grove. Quote Link to comment Share on other sites More sharing options...
grpark20 Posted October 21, 2008 Author Report Share Posted October 21, 2008 My setup is pretty close to yours. I run 160 mains, 42 pilots, and CEL needles with the clip in the middle grove. What kind of reeds are you running? Quote Link to comment Share on other sites More sharing options...
AustinTX Posted October 22, 2008 Report Share Posted October 22, 2008 What kind of reeds are you running? I run the SRP cages with Boyesen pro series reeds. Quote Link to comment Share on other sites More sharing options...
jayzx10r Posted October 23, 2008 Report Share Posted October 23, 2008 (edited) Mine is fairly close to yours. Sea level, 165lbs static compression and I run a 50/50 mix avgas 100LL/pump premium 91 octane. Specs are in my sig. 152 main, 3rd clip, 48 pilot. Edited October 23, 2008 by jayzx750 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.