TEXMEX Posted September 27, 2008 Report Share Posted September 27, 2008 So I have this pair to +2 Arms and a set of tie rods (13 1/2 in) with stock ends. Well I was washing my bike the other day and noticed that the two outer ends were bent on both sides. So I took them off to further investigate. Well when I originally bought the arms, they came with +2 rods as advertised. I am starting to think they are wrong. The 4 ends are only screwed in about 1/4 inch on both sides. So my question is, A: is it possible that I have +3 arms? or B: Is there some type of Muff up with the tie rods? I don Quote Link to comment Share on other sites More sharing options...
xXBlessedWithDeathXx Posted September 29, 2008 Report Share Posted September 29, 2008 i believe +2 would be 12 3/4th long seeing my stockers are 10 3/4th Quote Link to comment Share on other sites More sharing options...
Keyser Soze Posted September 29, 2008 Report Share Posted September 29, 2008 I have stock A-arms and ride tons of nasty trails. I kept bending the outers, or breaking. I went with 400ex tire rods and ends, no trouble yet. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.