es7200 Posted September 26, 2008 Report Share Posted September 26, 2008 Cleaning out the garage. All prices are + shipping and OBO. No reasonable offer refused. Will send pics upon request. Banshee parts -fmf exhaust (good shape, little bit of rust not much) $120 -works front shocks(good compression, for flat track, 14.5 eye to eye) $75 -stock tie rods $10 -stock carbs(tors removed, no idle adjust screws installed) $80 -J-arms with lower a-arms(left j-arm has slight bend barley noticeable, a-arms have several holes for shock/ride height adjust, all have good ball joints) $80 -coil( one end is no good) $10 -stock pegs $10 -chrome boost bottle $10 -89 j-arm frame(good shape, little rust, only prob is that the right pipe that comes up in front of motor is smashed, very fixable with a welder) $50 -stock plastic radiator guard $5 -used 14 t front sprocket $5 -used 40 t rear sprocket $5 -stock blk plastic foot wells $20 -rear shock needs rebuilt $20 -complete motor(blown, right piston melted down and bottom case has a hole in it, only thing missing is clutch plates)$200 Raptor 660 parts(all off a 2005) -stock belly skid plate $10 -stock swingarm skid $10 -stock exhaust $35 -stock headers $35 -stock front shocks $35 -stock oneway with gear(used but in good/usable cond) $120 -stock handlebars $20 -parking break lever $5 -parking break assy. w/cable(part that mounts to rear caliper)$20 -stock rear tires .5 in tread left $20 -stock a-arms w/ricochet skids(lower arms need new ball joints)$85 -stock gas cap $10 -stainless steel bake lines 51 inches long $25 -airbox lid w/snorkel $20 -plastic piece that key and lights go in(blue) $10 -stock cam(used but in great shape)$50 YFZ 450 parts(all off 2008) -stock axle(like new) $80 -stock right upper and lower a-arms(orange, paint rubbed off on front of lower arm from riding in grass) $65 -stock left upper a-arm(orange) $35 -stock tie rods $15 -stock air filter $15 -stock head pipe $35 -stock front tires 3/8 tread left $20 -right side mud flap blk(attaches to heel guard)$5 Quote Link to comment Share on other sites More sharing options...
SandRageShee Posted September 26, 2008 Report Share Posted September 26, 2008 You have a PM Quote Link to comment Share on other sites More sharing options...
LiftdT4R Posted September 26, 2008 Report Share Posted September 26, 2008 Where you located my man?? Quote Link to comment Share on other sites More sharing options...
quikshee Posted September 27, 2008 Report Share Posted September 27, 2008 You willing to part out the motor??? I need a cheap trans Quote Link to comment Share on other sites More sharing options...
es7200 Posted September 27, 2008 Author Report Share Posted September 27, 2008 Where you located my man?? Tama, IA Quote Link to comment Share on other sites More sharing options...
LiftdT4R Posted September 27, 2008 Report Share Posted September 27, 2008 Damn, I thought if it was closer Id come out and pick up that engine, but Iowas a long drive. Quote Link to comment Share on other sites More sharing options...
kawiking Posted September 27, 2008 Report Share Posted September 27, 2008 any pics of the front shocks ? Quote Link to comment Share on other sites More sharing options...
es7200 Posted September 27, 2008 Author Report Share Posted September 27, 2008 any pics of the front shocks ? sorry sold Quote Link to comment Share on other sites More sharing options...
carlcidortiz Posted September 27, 2008 Report Share Posted September 27, 2008 Cleaning out the garage. All prices are + shipping and OBO. No reasonable offer refused. Will send pics upon request. Banshee parts -fmf exhaust (good shape, little bit of rust not much) $120 -works front shocks(good compression, for flat track, 14.5 eye to eye) $75 -stock tie rods $10 -stock carbs(tors removed, no idle adjust screws installed) $80 -J-arms with lower a-arms(left j-arm has slight bend barley noticeable, a-arms have several holes for shock/ride height adjust, all have good ball joints) $80 -coil( one end is no good) $10 -stock pegs $10 -chrome boost bottle $10 -89 j-arm frame(good shape, little rust, only prob is that the right pipe that comes up in front of motor is smashed, very fixable with a welder) $50 -stock plastic radiator guard $5 -used 14 t front sprocket $5 -used 40 t rear sprocket $5 -stock blk plastic foot wells $20 -rear shock needs rebuilt $20 -complete motor(blown, right piston melted down and bottom case has a hole in it, only thing missing is clutch plates)$200 Raptor 660 parts(all off a 2005) -stock belly skid plate $10 -stock swingarm skid $10 -stock exhaust $35 -stock headers $35 -stock front shocks $35 -stock oneway with gear(used but in good/usable cond) $120 -stock handlebars $20 -parking break lever $5 -parking break assy. w/cable(part that mounts to rear caliper)$20 -stock rear tires .5 in tread left $20 -stock a-arms w/ricochet skids(lower arms need new ball joints)$85 -stock gas cap $10 -stainless steel bake lines 51 inches long $25 -airbox lid w/snorkel $20 -plastic piece that key and lights go in(blue) $10 -stock cam(used but in great shape)$50 YFZ 450 parts(all off 2008) -stock axle(like new) $80 -stock right upper and lower a-arms(orange, paint rubbed off on front of lower arm from riding in grass) $65 -stock left upper a-arm(orange) $35 -stock tie rods $15 -stock air filter $15 -stock head pipe $35 -stock front tires 3/8 tread left $20 -right side mud flap blk(attaches to heel guard)$5 I'm interested in the complete set of yfz450 a arms how much shipped to Puerto Rico zip code 00739 Quote Link to comment Share on other sites More sharing options...
KANEBANSHEE Posted September 30, 2008 Report Share Posted September 30, 2008 WANT PICS OF BANSHEE FMF EXHAUST PLZ SEND TO MASON@CU-RADIO.COM Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.