Search the Community
Showing results for tags 'drag'.
-
I have a drag banshee frame with 12 inch extension in the front with 10 inch extended swing arm and it has a 2001 Polaris 700 2 stroke snowmobile motor I weigh 150lbs but I wanna know what size sprockets should I be running I got this thing off of Facebook marketplace and it has a massive rear sprocket and I’m only 14 so I have no clue how to even get started in this drag banshee world
-
Selling my trinity 420 long rod banshee title in hand extended swing arm alky carbs lockout clutch 17cc domes cut frame Twist throttle several tires custom airbrush drag pipes lightened flywheel timing plate any interest best to contact me via text or phone call 8am-8pm 567-two zero four -2658
-
Hi I have a 2004 Yamaha banshee LE and I need a set of heel guard tabs that are welded to the frame. I know it has to be a drag banshee guy with a set .
-
This Motor is brand new with the exception of break in and dyno. It pulled 109 hp. It was built by Cascade for a personal drag motor. After build was complete the class was opened to 421cc. It was traded for side work. There is absolutely nothing wrong with the motor, I am just building a 10 mil *NOT PARTING OUT* This package includes: Override Transmission 2-5 N Down 375 4 Mil Crank Trued and Welded With TZ 500 Mikuni T38 Alcohol Carbs 350 VF2 Reeds 175 Billet Intakes 150 66 Bore Monoblock Cub Cylinders 1200 Pistons 0 Pro Design Cool Head 240 Domes 0 All Hardware Included: Nuts, Studs, Wrist Pin Bearings ETC 0 Total 2990 Asking 2500 This motor Is currently completely assembled and will stay that way until items are purchased. When funds have cleared, I can provided detailed bill of sale immediately via Email. Please allow 72 hours to ship. I work long days and far from home. Buyer pays shipping and fees. Located In SW Washington State. I have many pictures but am unable to upload do to size. Message me with contact info and I can send them. I am asking a fair price for a new built, ported and tuned package. All you do is put it together and send it. Thanks -
I am looking for a pair of 4mm cub cylinders or serval is fine also please let me know. Nikasil could be damaged
-
Need a nice set of chrome or nickel toomeys, paypal ready.
-
Inframe,small bore,unstamped,triple plated chrome. Has a dent, shown in pictures, but cant be seen when mounted. Comes with hangars and clamps, 500 shipped and you pay paypal fees
-
Ceramic coated black, un-stamped,small bore, in-frame cpi's. Comes with Cascade billet pipe clamps. $400 pp fees shipped Text or pm 971-221-6086
-
I haven't been on here in a while. I bought the passion setup from a member here, and never had a chance to install and run it. I was told it was ready to run, everything looks good to me. Some minor surface rust from sitting. All parts sold together. I will not break up. Oem cylinders passion racing ported mid/top 4 mil stroker (used) Wiseco 795 pistons 65.5mm bore (used) Trued/welded hotrod 4 mil stroker crank (used) Pro design cool head, studs, new o-rings no domes (used) Trail tech vapor computer, rad hoses w temp sensor and inline coolers. (Used) New case saver New pancake clutch bearing New new shift arm detent ball bearing kit New billet modded shift star New billet water pump drive gear Used chariot super flow water pump and housing $900 plus shipping & paypal fees Text for pics 207-949-2068 Stuff is all on ebay for 1100 plus shipping. Wanted to give you guys first refusal and a better deal -
Hey guys, I need some opinions on which set of pipes would be best for the most power. My mods are listed below -.060 super ultra stroker pistons -4 mill vitos stroker crank -keihin 35mm 2:1 carb -cool heads with 22cc domes -155lb of compression -fmf gold series pipes -k&n air filter without airbox lid I do alot of trail riding, dune riding, pretty much all riding. This bike was recently dynoed by MacDaddy racing and made 61.28 hp @ 9,670rpm I was debating between rocket drag style pipes or shearer drag pipes and want your guys's opinions on which would be best for me. Thanks!
-
For $300 I have a 2-5 override tranny. I can never seem to make up my mind on my next build. This time I have decided to go with a 1-5 tranny so that I can still possibly run the 1/8 mile on asphalt. I also have a stock tranny that I'll let got for $80 shipped.
-
COMPLETE ROLLER FOR SALE $5,500 ...DUAL A ARM +10 LONESTAR FRAME WITH +10 SWINGARM,ADJUSTABLE AXEL,MARVIN SHAW SHOCKS,TORCHWORKS RADIATOR,CHROME BRAKE PARTS,CHROME GRIPS+THROTTLE COVER,SHAVED SEAT,BILLET FRONT HUBLESS WHEELS ON 181/2 INCH TIRES. REAR 10 PADDLE TRIPLE BUFFS. NEVER WRECKED BUT SOME SCRATCHES ON THE FRAME. I RAN A K&T RACING 10 MILL BANSHEE MOTOR ON FRAME SET UP FOR HILL SHOOTING. I bought the frame brand new it comes with LSR Certification of Origin paper....MY contact 1 (209) 480-6437 located in Ceres CA. attachment=24642:IMG_0440__1396843834_99.25.166.199.jpg]
-
Ok I no this page is full of knowledge and need some help. I just restored a banshee with a 10mil Cheetah in it. I removed the PV and had the motor gone through by a local shop. On the second time out it began to run like crap, so I took it back to the shop. They tore into it and discovered the one of my reeds (VForce 2) had a broken pedal. With further review they discovered that one of the screws (typical) came loose from the reed and took out my piston and dome. Where is where I need advice... It has 125mm rods, 72.5 pistons with 18mm wrist pins. I have been told that pistons with 18mm wrist pins are obsolete and only a couple left in existence and cost $350-400.00 a pair. Is that true? Does anyone know of a vendor that I can find these? Thanks in advance.
-
Looking for a nice set of Big Bore In Frame Shearer exhaust. Cash in hand Thanks in advance.
-
These are in excellent shape $80.00 I can email or text pics, having trouble uploading photos -
I have a nice billet RKT torque- line head with domes. make offer. I can email or text pics, having trouble uploading photos.
-
I have a nice set of Cheetah power valves. Make offer I can text or email photos, having trouble uploading photos
-
I have a complete 2-5 Override tranny that's in near new condition. Cut by Cam at Redline Racing. 1 shift fork has a fair amount of wear, everything else is in very nice condition. $175.00 I can text or email pics, I'm having trouble loading photos
-
Located in NE Texas I have some stock cylinders, long studs for cool head, ported by K&T, 64.75mm bore. Just pulled from my bike. Has K-T engraving on the outside of both cylinders. $350 + shipping (will post pictures later) AC Racing Nerf bars, and front bumper (will not separate) bumper has small ding in the top $100 + shipping unknown manufacturer heimed 2+ 1+ A-arms, chrome, I bought this bike and I dont need them...they look new. $300 + shipping -
iv been looking at the 421cc cheetah cub 4mill kit on ebay im going to be drag racing asphalt looking to throw this into my stock cases adding a lock up and out of frame drag pipes, what are some things are a must to do? is this a good kit for doing it? any suggestings carbs size etc any help will be greatly appricated. http://www.ebay.com/itm/Banshee-421cc-68mm-Cheetah-Cub-Cylinder-4mm-w-Crank-/250592325047?pt=Motors_ATV_Parts_Accessories&hash=item3a58776db7&vxp=mtr -
i got a efi 450R full system fmf w/ fuel tuner...nerfs..pro tuned suspension..motor rebuilt last year w/ cyl worx cylinder 12:1 vertex piston new timming chain and drop in hot rod crank....19 tires on back 21 front 15tooth front gear...well taken care of sold my cub a couple years ago went and got this and got the whole trail ride thing outta my system...now i wanna go fast agin...im wanting somthing on shocks w/ duneble cut trans....i use to ama hillclimb w/ a trx 500r hybrid and i would like to try it agin with a shee im open to any offers drag or hill msg bak for pics....i value my bike around $4500 thanx matt
-
I have a 1995 drag banshee that I race on a 200ft dirt drag here in Kentucky. Last weekend I had a stock cylinder crack on the right side near the base bolt. There is no welding this crack. I am trying to find the best deal and setup for my style racing. I am new to the 2 stroke world and dont know where to start on this topend. mods: 4 mil crank neutral down 2-5 cut tranny stock cylinders drag port and polish with wiesco #573MO6625 pistons cool head 17cc domes 35.5 mm back bored Air striker carbs Chariot intakes v force 4 reeds Precision performance drag chassis If anybody has any info it would be much appriciated thanks
-
Hi looking for an aluminium tank good condition to fit stock location lmk what you have
-
THIS IS A CUSTOM ATV DRAG BIKE WITH A 10 MILL CUB ALKY BANSHEE MOTOR MOTOR HAS ABOUT 10 PASSES ON IT ( THEY CLOSED THE LOCAL DRAGS SO I HAVE NO PLACE TO RACE IS REASON FOR SELLING) I ONLY GOT TO TAKE THE NEW BIKE TO ONE RACE! IT DONE VERY WELL RUNNING A AVERAGE 3.8SEC 300FT TIME ON HARD PACK DIRT HOTRODS 10MILL CRANK 1-5 ND CWR CUT TRANNY DIRECT DRIVE LOCKUP AND POLISHED COVER STOCK CLUTCH BASKET AND PLATE DRIVELINE HEAVY DUTY DRAG PLATES AND FIBERS POLISHED 35MMPWK ALKY CARBS AND K&N FILTERS WITH OUTERWARES MIKUNI PUMP VITOS HEIMI HEAD V-2 REEDS AND POLISHED BILLET INTAKES POWDER COATED GLOSS BLACK PORTED CASES (CASES ARE CNC TRENCHED AND EPOXIED BUT WAS NOT CUT THROUGH) GREAT SHAPE NO WHACK! CHROMED KICKER LIGHTENED FLYWHEEEL DYNA PROGRAMMABLE IGNITION WITH PROGRAM KIT RDZ NICKLE PLATED OFF SMALL BORE SMALL FLANGE DRAG PIPES (ONE STINGER HAS BEEN RE-WELDED BUT LOOKS GREAT AND BARLEY NOTICEABLE) CUSTOP CLEAR HOSES WITH POLISHED ESR TEMPGAGE FRAME IS A CUSTOM MODIFIED CHASSIS WITH 4130 CHROME ALLY +20 INCHES IN FRONT AND SUB FRAME BODY PANELS ARE CUSTOM PAINTED BLACK WITH REAL FIRE CHASSIS IT CUSTOM PAINTED CANDY TANGERINE SPARKLE OVER TRICK GROUND METAL POLISHED BILLET TIERODS LIGHTENED FRONT HUBS SUPER DUTY RADIATOR BILLET FRONT ADJUSTABLE TRACK BARS CHROME SHORTY STRAIT HANDLEBARSPOLISHED BILLET GRIPS POLISHED MSR CLUTCH LEVER AND PERCH WITH STAINLESS CABLE POLISHED BAR CLAMP POLISHED THROTTLE STOCK TANK WITH CHROMED COVER AND BILLET CAP GRIPPER LOW CUT SEAT ( DOES NOT COME WITH CHECKERED SEAT SEAT IN LAST PIC IS WHAT WILL BE ON IT) CUSTOM SHORTY SHIFT LEVER AND SHORTY BRAKE LEVER POLISHED BILLET FOOT PEGS (MOUNTED BACKWARDS TO SET YOUR CG TO THE BACK) RDZ CHAIN tentioner $6200.00 obo bike is in Greenwood In . 46143 contact David at 317-372-8669- 4 replies
-
- 1
-
-
- drag
- custom paint
- (and 2 more)
-
not included: brake line, caliper, master, front hubs and wheels, levers, carrier, kill switch or cdi. will sell all, have a rad plastics and drag seat can include also. shoot me a PM. swinger is a +6. bar uses 6 heims joints, very easy to ride for a stock frame, pretty light. t bars, subframe, struts all 4130 .058 chromoly. has been 4.10 at 80 on sand and 6.0 at 100 on 500' dirt. only selling because i am upgrading the chassis. might part out if i get enough interest. $800 for whats listed.
