Search the Community
Showing results for tags 'Yamaha'.
Found 18 results
-
Hi I have a 2004 Yamaha banshee LE and I need a set of heel guard tabs that are welded to the frame. I know it has to be a drag banshee guy with a set .
-
I have a banshee that was going to be a project but its been sitting for a few years. It has freshly serviced carbs but has a hole in one of the pistons, the Jugs are still good. Its a early 90s I believe almost everything is available still. i will be posting some things on ebay aswell, But anything your interested in please ask. Im just getting started so will have pictures soon
-
I have a 2002 yfz350p "Banshee" that I want to do some motor work to, does anyone know of a mechanic in the NY, CT area? -
10mil build with 795 pistons need help with carb size and anything else??
-
Got a 04 Yamaha banshee. What are some mods to make it faster and increase acceleration and hp
-
2000 Yamaha YFZ 350 BansheeTitle In hand ( Very rare for these to have title)Super clean bike, heavily modifiedFull Paul Turner National Mid Range Kit built by Duncan Racing in California Cool Head, Signed Paul Turner, Paul Turner Pipes, Dual Carb, Pyramid Reed Valves, Paul Turner Fat Boy 2 ExhaustRoll Design A-Arms and Swing ArmRPM Front Hubs and New RPM Dominator 2 AxleNew Hiper Wheels with ITP Holeshot Tires New DID Chain and New SprocketsNew DG Front Bumper and Grab barNew Blade Style rear rotorJust Serviced ( Fresh Fluids, New Exhaust Packing etc.)TCS Suspension ( Fronts Recently Rebuilt, Rear needs to be rebuilt)Red Powdercoated FrameCustom Ostrich SeatThis Is a serious BikeRuns on 112 Race Fuel Serious Buyers Please Call Matt @ 561-797-6989Asking $6500 OBOYou will not be disappointed when you see bike. Not many out there like this
-
***ATTENTION**ATTENTION**ATTENTION*** ***ALL ATV OWNERS**&**ALL UTV OWNERS*** DTR Racing Has over 500 products and accessories for all your ATV's and Side x Side's on sale right NOW. Check out our DTR Racing EBay store for some of the best pricing around. Don't see what your looking for? Feel free to give DTR Racing a call at (503)589-1300. http://stores.ebay.com/DTR-Racing DTR Racing 1810 Commercial st ne Salem, Oregon 97301 M-F 10am-6pm Sat 10am-5pm
-
Hey Everyone, We have developed a new set of OEM cylinders for the Banshee and are looking for a couple of Beta testers to Run them on there bikes for feedback. Cylinders have finished our inspection and are pre-release right now which means we want them tested on a few more machines before we begin selling them on the open market. Our MSRP for the cylinders is 499.00 for the pair. I have 2 pair in hand that im offering at 250.00 with a money back guarantee if they don't work as they should. We will cover the cost of getting the cylinders to you, in return all we are asking for is your direct feedback on function and ease of install. You will be required to purchase a set of stock pistons and the required gaskets to go along with it. Bore measures same as stock 64.00MM Call Adam if your interested in trying them out. We are only looking for buyers that are willing to provide direct feedback, please don't buy if you don't intend to install within a short time frame. Thanks 1-888-672-5141 or email partdiscountersales@gmail.com
- 149 replies
-
- 1
-
-
- Cylinder
- Cylinder Kit
- (and 5 more)
-
6 Weeks ago my banshee developed a clutch problem. I rode down the road and when I released the clutch handle the clutch arm jammed and the clutch cable came loose. We knocked the clutch arm back, put the cable back in place, tightened and we were able able to push the clutch arm fully back and forth with our finger alone, so it worked again. Now we've got it back and after changing gears for the first time, it did the same thing. Pulled in the clutch handle, release and it didn't spring back. Because the clutch arm jammed shut and the cable had come loose and was pulling freely. We tried the same thing but only managed to free it a little, the clutch arm does not go far enough forward to actually engage the clutch. I'd like to know if there's anything if I can do to help the situation that doesnt require a lot of stripping. I'd like to refrain from sending it to the Yamaha mechanic for the 3rd time in 5 months, but if it involves taking the engine out, stripping the clutch and removing the carbs just to take out the clutch linkage, then i'll just send it to the mechanic once again because I really don't know what to look for. Here is a video showing the problem:
-
looking for a top end setup for sale Need pistons, cylinders, head. Want a ported stock stroke or 4mm ready setup. Will consider a less preformance setup for a good price. Will also buy crank! Stock or 4mm paypal ready and experience shipping needs sent to North Dakota
-
Black Label 1 Piece fiberglass hoods in stock, ready for sanding and paint $180 plus shipping 541-653-9006 paypal blpowersports@gmail.com we offer bulk discounts with purchase of 2 or more
-
What should I check and look for when buying a banshee.
-
Can you but a arms on a banshee when it has v arms?
-
I'm looking for a pretty close to stockish banshee. My budget is 1250 cash and preferably in Georgia. Any help will be appreciated!
-
I'm looking for a cheap set 16-18 pattle tires for my raptor.
-
1/8mile atv grudge racing at Piedmont dragway Saturday May 18 no time run wat u brung....we do welcome hand clutch streetbikes not full grudge bikes Track will be preped light or as needed Grudge 1:30-8 (can go longer long as its racing) 6750 holts store road Julian North Carolina 27283 Hotel info RAMADA CONVENTION CENTER 2703 Ramada Rd., I-85, Burlington, NC 27215 US Check in:After 3:00 PM Key Word: PIEDMONT (For the Discount) 1-336-227-5541 https://www.facebook...574301/?fref=ts Quote MultiQuote
-
1/8mile atv grudge racing at Piedmont dragway Saturday May 18 no time run wat u brung....we do welcome hand clutch streetbikes not full grudge bikes Track will be preped light or as needed Grudge 1:30-8 (can go longer long as its racing) 6750 holts store road Julian North Carolina 27283 Hotel info RAMADA CONVENTION CENTER 2703 Ramada Rd., I-85, Burlington, NC 27215 US Check in:After 3:00 PM Key Word: PIEDMONT (For the Discount) 1-336-227-5541 https://www.facebook.com/events/159167067574301/?fref=ts
-
1/8mile atv grudge racing at Piedmont dragway Saturday May 18 no time run wat u brung....we do welcome hand clutch streetbikes not full grudge bikes Track will not be preped Tnt 11:30-1:30 Grudge 1:30-6 (can go longer long as its racing) 6750 holts store road Julian North Carolina 27283 http://www.facebook.com/events/159167067574301/permalink/159174557573552/?notif_t=like
