Search the Community
Showing results for tags 'Powder coat spark no fire'.
Found 1 result
-
Ok so I just recently got done doing a restoration of sorts to the shee. I had the frame powder coated by Blake at prodigal sons,jds cdi relocater, and wiring harness modified by kompolsive components. I installed everything back together making sure to clean of a grounding spot where the coils mount to the frame. I also attached The lighting/ground wire to the coil mount bolts. I have no spark whatsoever. After reading on here I decided last night to relocate the ground to another spot on the frame as well as run an additional ground from the cylinder base but to the coil mount. I have ohmed the stator,key switch,ignition switch and checked continuity in the wiring to make sure it's not bad wiring. Last night I hooked a spark tested to the plug wire and the spark plug and would not get a spark when run switch was on but is it was off I would get a single spark on. The first kick nothing after. Can someone please point me in the right direction. I have tried everything that I hae read on here and that I know. I know it's suppose to be simple but it's kicking my ass.
