Search the Community
Showing results for tags 'Billet'.
Found 14 results
-
Dune ported stock cylinder and stroke banshee motor,170psi on each cylinder,Redline dune port, cylinders are on an even 65.00mm bore, Cool head and I have no clue what domes are in it, but was told to run straight 110, Hinson clutch pusher, NEW cascade clutch pak, billet water impeller, ultra-lightweight billet racing dipstick, zero chain whack, new 13t sprocket for whatever thats worth. $950 shipped plus paypal fees
-
'99 Banshee motor Found a cub motor and took this out of my bike. Built by Shaun at Top Dog racing in Damascus,OR. I have all the receipts and the dyno sheet for this motor, 50hp with t5s on pump gas. Polished clutch cover with RIS designs flame dipstick, waterpump and clutch insert, billet impeller(brand unknown), Driveline HD clutch pack with springs, coolhead with 20cc domes, clean up port on the cylinders. Call,text or PM me Joe 971-221-6086 $800 + plus shipping
-
Anything not listed is SOLD. Front brake calipers - $50 Front hubs - $20 Blue drag cut plastics spray painted black - $100 Alba six pack rack- $40 Stock intakes - $25 Stock carbs - $140 add another 50 for K&N filters w/ black outerwears Stock Spindles pc'd black off a '99 - $35 Stock clutch cover polished - $40 Stock jugs w/nice clean up port 64.50mm - $200 Stock reed cage w/Boyeseen Pedals - $40 Boost bottle - $15 Stock ignition w/NGK boots - $25 Dynatek programmable CDI off an 87' - $125 Clutch linkage w/ rod and ball - $20 Magneto off an 87' - $50 Complete transmission - $150 Clean matching cases w/ no chain whack or JB patches - $150 Yellow radiator shroud w/ stock grill, black drag cut front fenders modified for desert tank, 5 gallon IMS tank, would like to sell as a set - $220 Stock seat w/ aftermarket cover - $80 8 paddle Sand devils for 10 inch rims - $60 Coolhead w/20cc domes - $90 key switch off an 87' w/ key - $20 Jim Duncan Full Race Port 65.00mm bore, needs a new stud and water seal - 165 shipped Dune Port for stock stroke 65.00mm bore - $285shipped clean up port, very well done,65.00mm bore - $200 shipped Call or text Joe or pm 971-221-60eight6 -
Up for sale are my gently used Chariot Billet Intakes and Chariot Billet Reed Cages. I want to sell these as a kit, so please don't ask. I installed these with Chariot Billet Intakes, Chariot Billet Reed Cages and a Chariot Billet Timing Plate set to +4* timing advance. With these mods I could pull 6th gear with 20" Sand Skate II 8 paddles in Pismo with stock 14/41 gearing. Before these mods I couldn't shift into 6th at all. Chariot is selling the internal cross-over billet intake for $147 shipped. http://www.ebay.com/itm/Chariot-Banshee-Billet-Intakes-26-30-carb-Crossover-VForce-2-3-4-/252361540262?hash=item3ac1eb82a6:m:mloFOmdYxyNX428-ou9Ijvg&vxp=mtr Chariot is selling the billet reed cages with Boyesen 2 Stage Reeds for $170 shipped. http://www.ebay.com/itm/Chariot-Banshee-Billet-Reed-Cages-Better-THAN-V-Force-/281679155262?hash=item419562d03e:m:mQiUSx_OuClf0SVTwBdmZ5w&vxp=mtr I'll let these go for $230 Paypal'd and I'll cover Paypal fees and shipping to the lower 48 states. I found the genuine Mikuni Boots on eBay for an Arctic Cat Snowmobile. Comes with everything you see here. -
Clearing out some quads and a lot of projects and parts that were meant for such projects. All parts are either brand new never used or in excellent shape (simply bolted up or less than 3 rides) unless stated otherwise. More will be added as I have time to take pics and post them. Prices are shipped unless stated otherwise and prices are for gifted payment, PayPal fees will need to be covered by the buyer. PayPal is BlakeRms288@yahoo.com Sniper Inframes w/ stainless packing and billet clamps - $795 new, asking $620.-Sold 40mm Billet Smart Carbs. $1,300 new. Asking $1,000 for the pair or $550 per. Comes with instruction manual and original box.-Sold Chariot Red Anodized Thumb Throttle opens up to 49mm. $135 new asking $100 with new MP cable or $50 if bought with carbs. -Sold Chariot 36-40mm Intake. Asking $110 or $60 if bought with carbs. Chariot 32-36mm Intake. Asking $100. Bottom of photo is the 32-36mm, top is 36-40mm. Chariot Ultra High Flow Impeller Kit. New $160 asking $120. -Sold New still in sealed plastic packaging. V-Force 3 Reeds. Asking $100. -Sold New Reeds. ProDesign 21cc Domes New in Package. Asking $50. ProDesign Cool Head W/ like new 21cc domes. Asking $150. O-Rings appear to be good and would work in a pinch but obviously you should install with new and maybe keep these for back up/emergency use. PD Cool head w/ no domes or o rings. Asking 100. Sold Fuel Injection Components. Spent over $1000 for these components. Asking $900 for the bundle. I collaborated with Whitbread on these components. Used and new parts are noted. LTR450 throttle and cable(USED), 2 - ls2 truck coils and pigtails(NEW), NEW From DIYAutoTune - "GM Closed Element CLT / IAT Sensor with Connector" & "Engine Management System w/ 30" wiring harness" , cannondale 440 fuel pump(NEW), gm flex fuel sensor (NEW) for e85/meth on the fly capability, Innovate LC1 wideband module and sensor (USED), 03-04 R6 throttle bodies(38mm USED), Pingle fuel valve(USED). What you will need to complete this project. Modify the R6 throttle bodies from 4 to 2, Make an intake adaptor to bolt the intake boots, have the flywheel fitted with a trigger wheel, 200w stator with DC conversion and small battery. Then patience and education. http://www.msextra.com/manuals/ms2manuals/ That's all for now. I'll add more over the next few days. If you have any questions or would like more, specific pictures of something let me know. Thanks for looking, Blake -
Any one have any billet, chrome, or polished side covers ... clutch cover, water pump cover, stator cover, foot pegs, etc. ?? Looking to dress up the 94. PM or text pics .. 202-486-6044 Thanks , PayPal Ready ..
-
Price is shipped inside the U.S. Polished Chariot Billet Bowls • for keihin carbs $125 shipped
-
We are having an end of the year sale. Also check out our new Clutch cover design. http://stores.ebay.com/Mattoon-Machine?_trksid=p2047675.l2563
-
Prices are shipped in the lower 48 unless otherwise noted. Please contact me with other shipping areas. Buyer pays fees or gifts payment. All parts are in excellent condition unless otherwise noted. Also may have other parts not listed. Ask if you need anything else. I have tons of misc. nuts and bolts as well. Questions? Text 253-335-9129 Aftermarket parts: Chrome foot pegs w/ chrome bolts- 60 Billet handlebar clamp (ZYR)- 10 Polished clutch cover w/ Cascade insert and bolts- 50 Polished rear master cylinder (no caliper or line)- 20 Cascade heat wraps, brand new (17")- 35 SLC chrome arched ladder bar swingarm w/ chain whack (+12)- 215 (Text for pictures) Factory drag cut rears w/ crack- 30 + shipping Stock parts: Coolant bottle w/ aluminum bracket- Pay for shipping Rear shock link/ dogbone- 20 ***Front hubs (PC purple) with spindles and rotors- 55 (will separate) ***Rear hubs (PC purple)- 25 ***Sprocket hub (PC purple) w/ 45 tooth sprocket- 30 ***All for 85 A-arm bolts (upper and lower)- 15 12v box- 8 Clutch actuator- 10 Steering stem clamp with wire guide- 10 Radiator mounts- 8 ea set Lower motor mounts- 10 ea set Steering stem- 30 -
Used Chariot Performance Billet Intakes with NEW 34 to 36 carbs boots. Intakes come in powder coating gloss black and the croosover plate come in powder coating translucent blue. The black in excellent condition, blue have some little imperfections, barely visible with the intake installed. Also come with eight (8) titanium bolts in blue color. Internal o-rings included. Ready to install. $135.00 shipped via USPS.
-
Used JDS Customs Banshee Engine Support Billet. Come in powder coating gloss black and with stainless steel hardware. JDS sold it with out powder coating and with out hardware. $150.00 shipped via USPS.
-
I'm located in northern California I only accept Paypal Buyer must cover Paypal Fees I ship with USPS --------------------------------------------------------------------------------------------- - Red Fullbore Rear Plastic (Has been Sanded, Ready for Paint, or you can Buff It) - $125 Shipped The black spot is fiberglass where the exhaust melted through the fender. - Billet UMI Racing Handlebar Clamp w/ Light Mounts - $40 Shipped Dropped the clamp, has a couple of small dings. - Stock Rear Exhaust Hangers - $15 Shipped - Powder Coated Billet Rear Exhaust Hangers - SOLD - Painted Fullbore Fronts & Mesh Grille (Flat Black w/ Gloss Flames) - SOLD - Stock Rear Cut Plastic Painted (Flat Black) - SOLD - Amp Link - SOLD - PRM Rear Skid Plate - SOLD --------------------------------------------------------------------------------------------- -
--------------------------------------------------------------------------------------------- I'm located in northern California I only accept Paypal I ship with USPS --------------------------------------------------------------------------------------------- Vision X Billet Blue LED Underbody Pod Accent Lights - $40 Shipped for ALL 3 VERY bright at night, good look for a duner. I PAID $30 E/A for these a while back, now they retail for about $25. Item Number: HIL-DB ---------------------------------------------------------------------------------------------
-
Pretty simple, really. Picked up this used '99 2 weeks ago, and looking to make changes already lol. It came with this billet grille that I'm actually not a fan of. I'm looking to trade it for a stock one, or one that's PCed black. Looking to go with a black/silver theme, and this grille is just killing it lol. It's currently at Diggin Racing for some maintenance, but if someone wants it, I'll grab it as soon as I have the quad back. Let me know what you have, and work something out! I'm located in Long Island, NY -Joe
