Deets

I disagree, I’ve been messing with 2 strokes for bit. I’ve tested this on my Race saws a few times. More oil equals a leaner tune.

Sent from my iPhone using Tapatalk

Sent from my iPhone using Tapatalk

I don’t have any numbers, these must be knockoffs

Yes, less oil means more gas in the mixture. Which will richen tune just a tad.

Anyone else adjust ratio for temp? My shee is a tad lean at 30 degrees, so I was thinkin of running 40:1 instead of 32:1. So I don’t have to re-jet and then in a week when it warms back up, re-jet again.

Shit tons of filters with a 2” boot.

Sent from my iPhone using Tapatalk

There are no part numbers on the filter whatsoever. Cheap Chinese knockoff I’d imagine. The boot ID is 2” or 51mm Sent from my iPhone using Tapatalk

Lol

I run 32:1 in all my blowers, Chainsaw’s, And weed whips. So when I got my banshee it was a given. I’m a fan of more oil.

I’ll pull a filter off tomorrow and look

Sent from my iPhone using Tapatalk

I bought carbs as a set with K&N style offset filters. Filters for 28mm carbs seem to run double the price of other filters for some reason. Guys at fast told me the same thing. you can run a stock throttle cable with them, mine was kinked and rusted so I got a new motion pro cable and luber. Squish is .045 and elevation is around 1,000 if I remember right. I could Probly up my mains to 150, but warmer weather is coming so I’m gunna leave it for now.

I see that

You haven’t missed much, other than Skeeter wanting to LYBH.

Got the gauge goin, these old RacePak’s aren’t that user friendly. I’d really like to get this thing on the dyno, but this damn virus has things all fucked up

Meh, at least he still posts here.

Sent from my iPhone using Tapatalk

Also got my RacePak mounted, just need to put my bullet connectors on and it’s ready to go. Sent from my iPhone using Tapatalk

Went with the billet cages and 2 stage reeds. Was always a boyessen fan. Also got oversized radiator, ultra high flow water pump, dual pingle, Chariot billet intake. Sent from my iPhone using Tapatalk

Finally got all my parts and everything put back together. Fucker rips man, really happy with throttle response and overall performance. Jetting was surprisingly close on the first try. I started with 148’s and 48’s, clip on second position with 2 washers underneath. I upped the pilots to 50’s and it’s perfect.

I just put 28 pwk’s on mine too. Sometimes I get a lot Coming out of the overflow, but it only happens sporadically.

I put fiberglass wrap under the hose. Sent from my iPhone using Tapatalk

I put fiberglass wrap under the hose. Sent from my iPhone using Tapatalk