[What do you want?]

but why? just run pods or an airbox.

I do run pods. Have to sandwich them on because they hit the pipes. One large filter in the center would clear.

[What do you want?]

That's the basic idea . Something a little cleaner looking like this. 

[First Banshee Help]

Get another gauge or borrow 1 from a friend to see how far yours is off. Then again your friends gauge could be off 

[Motor shop in the north east]

Sleeper06 is Da man!!!! Long island is were he's at.

[What do you want?]

Some what Ghetto, but this is the idea. I'm sure JD could fab something up a lot nicer.     

 

[What do you want?]

Didn't LED make something like this?

Not sure if he makes 1 for a Banshee, but I know he does for a 250R

[Old Dirt Wheels mag 2003]

Not sure on what kind of power a 535cc can put down. For back in 03 a 130+ hp does seems stout.

[What do you want?]

Cut up an old air box and get the adapters for bigger carbs. I think BansheeHP runs this on his trail snail.

Good idea. I have a nice stock air box I can hack up.

[What do you want?]

JD get movin on this. Please make the tubing is made out of Alu. and include different size hose ends for 35mm & 39mm carbs. patent pending

 

[Old Dirt Wheels mag 2003]

Anyone remember this Dirt Wheels article from May 2003?

 

[Sleeper06 porting]

Glad to hear you are happy with Sleeper's port work. Never heard a bad word about him. I'm very happy with the performance of my 10mil serval. 

[creative pipe insulation ideas to protect pods]

Someone needs to come out with a nice 2 into 1 filter setup. Not like that cheesy 1 that Toomey has. This needs to be made of aluminum tubing and can fit a large single K&N pod on it. It can use different size rubber boots to the carbs, so if you changed to smaller or larger carbs the unit would still fit. A lot people having clearance issues with pods / pipes ect... I think there would be a good market for this. JD where you at??????

[Sniper pipe fitment]

Mine fit better than that. Grease them bitches up and slide em on!

[able to change Main, pilot jet in PWK 35 without removing carb?]

I just replaced my billet manifolds with UPP's. My pods where hitting the pipes, so the upp's dropped it down some.

[able to change Main, pilot jet in PWK 35 without removing carb?]

Yes you can. I just did that yesterday. Just seams easier to do it on a workbench.

[Wheels]

Sure will!

[Plog chop]

Something is fucky. With the jets you say are in it and the mods you have listed, there should be some kind of color on those plugs. Before you even chop, you should see color around the base of the plug ring. If it's lean it'll get a dry, roasted greyish color, but yours look as though they are being washed clean in the photos.

Coolant leaking into the chamber??

[Best hooking tire ?]

Are the Pulse are going to hook that much better than these?? 

They don't look that much different.

 

 

[Best hooking tire ?]

Now that I'm making good power ( 10 mil) my tires [xc masters] just spin. I need a tire that can do it all. Not enough sand here for a paddle. I go down paved roads to get to riding areas. There is soft sand, gravel, hard packed and trails. Anyone use Skat trak terrain traks?  I know that they wont be as tough as a 6 ply trail tire, but I can still keep my XC tires & wheels for trails. Any help or info on sizing or how many paddles needed. Gearing is 15/40 as of now. Thanks.

[Plog chop]

I would be going up on that main. I believe going up one size is about a 3% increase in fuel. I would be going up to a 310 to be safe.

[Am I missing something here? (LECTRON 39mm)]

Some guys do that to increase bowl volume.

[Fast billet intakes]

Intakes are sold!!

[Fast billet intakes]

DO YOU STILL HAVE INTAKES

YES!!

[Got my Driveline LP (low port) Cylinders.]

I'm dying to port a set of these bitches

I have a set for you to mess with. 

[Fast billet intakes]

Well what about an xbox?

ColecoVision or Atari 5200 only