JordyRoo

As title, any condition considered.

As title, prefer monoblock

As title, must be clean & ship to the UK

Done here in England

Hi guys, trails & street riding. Ill have a chat with my tuner.

Im thinking more top, without sacrificing too much, ive got the vforce 4 reed block. Yeah i think i want rid of the FMF

Hi again guys wondering on best pipe choice for a 4mil, 66mm bore, 21cc domes, +4 timing, mild port job, vforce 4. Currently running FMF gnarlys & powercore 2s... not really sure theyre the right pipe for the job.

Will make a new thread but what about pipe choice? Im currently using FMF gnarlys but im not sure theyre the right pipe for the job...

Ok thanks guys!

Wondering on best carb choice for a 4mil, 66mm bore, 21cc domes, +4 timing, mild port job, vforce 4. Running 50/50 av gas & shell v-power (99 RON) Currently running 28mm PWKs, is there a better choice?

Ok thanks, what i dont get it why only 1 cylinder is like it. The other is fine.

Not many hours at all. Around 6, if crankseal failed wouldnt it be the left hand piston to go?

So a guy i know has blown his piston in his banshee, only on the right hand side. It has a hole in the top & melted the tip of the plug. When built the motor was leakdown tested & held overnight with no problems. The only fault you can see is the plug thread cap had come off & was in the plug cap. Could this being loose & vibrating cause the hole? Misfire & then big ignition?

Think ive got it. 50 pilot, 180 main, middle clip, 1 & quarter turns out. Pulls clean no flat spots. Thanks for all your help guys

BR9's?